Fire Pit Ring Collection Overview

Decent Crafts manufactures metal fire pit rings for patios, gardens, campsites and defined outdoor fire areas. The current collection includes round and hexagonal campfire rings, 36-inch and approximately 90 cm formats, heavy-duty structures and portable designs.

Buyers can choose plain or decorative panels with geometric lattice, deer, wildlife, forest, night-sky, tree and Bigfoot cutouts. Selected models are supplied with a bonfire liner or poker. Dimensions, panel structure, installation method and included accessories should be confirmed for each product.

Revêtements résistants à la chaleur : 650 à 800 °C, selon le modèle et le système de revêtement choisis.

Explore Our Fire Pit Ring Designs

Assistance pour la vente en gros et les fabricants d'équipements d'origine (OEM)

Decent Crafts supports wholesalers, retailers, importers, garden brands, campsite suppliers and project buyers with OEM and customization services. Depending on feasibility, buyers can request custom diameter, height, panel thickness, ring shape, joining structure, airflow openings, decorative cutouts, colors, finishes, logos, accessories and packaging.

Selected products can be developed from drawings, reference photographs or physical samples. Before sampling, confirm the intended installation, target dimensions, material and finish, pattern, accessory package, packing method and destination-market requirements.

The standard MOQ displayed for the current fire pit ring models is 100 sets. Typical sample lead time is 7–15 days, while bulk production normally takes 30–45 days, depending on the product, quantity and customization requirements.

Send us your target design, diameter, quantity, destination country and customization requirements to receive a suitable recommendation and quotation.

Request a Fire Pit Ring Quote

Découvrez tous nos foyers d'extérieur

Affichage de 1–18 sur 26 résultats

How to Choose the Right Fire Pit Ring

The right ring depends on the intended fire area, dimensions, structure, installation surface, decorative design and commercial requirements. Consider the following points when comparing models.

01

Diameter & Height

Compare the outer diameter, internal fire area and ring height with the intended location. The current collection includes 36-inch and approximately 90 cm formats.

02

Shape & Panel Structure

Choose between round and hexagonal designs, then confirm whether the ring is a continuous body, joined panels or another structure.

03

Installation Surface

A ring defines the fire area but does not automatically provide a heat-insulating base. Install it outdoors on a stable, level and non-combustible surface.

04

Airflow & Decorative Cutouts

Openings contribute to airflow and visual effect, but larger cutouts expose more flame and embers. Match the pattern to the intended setting.

05

Liner & Accessory Compatibility

Confirm whether a liner, poker or other accessory is included. Verify dimensions when matching an existing insert or site-built fire area.

06

Project & Packaging Requirements

For campsite, hospitality, landscaping or retail programs, confirm installation instructions, edge protection, carton design and labeling.

Custom Fire Pit Ring Manufacturing Services

We support custom metal fire pit ring development for distributors, outdoor-living brands, campsite suppliers, landscape programs and project buyers. Customization can include diameter, height, ring shape, panel structure, decorative pattern, ventilation openings, thickness, finish, logo, liner, poker and packaging.

A development request should include the intended installation and use, target dimensions, expected order quantity, preferred material and finish, cutout artwork, accessory requirements, packaging needs, destination country and applicable market requirements. Drawings, reference photographs and physical samples can also be evaluated.

Discuss Your Custom Fire Pit Ring Project

Fire Pit Ring Use, Care & Safety

Requirements vary according to the ring structure, installation, finish and supplied accessories. Product instructions and applicable local fire rules should take priority over this general guidance.

1. Before Installation & First Use

Remove all packaging and inspect the ring, seams, panels, fasteners, liner and accessories. Assemble according to the instructions and make sure all connections are secure.

Install outdoors on a stable, level and non-combustible surface appropriate to the fire area. Check relevant local restrictions and do not use a damaged or incorrectly installed product.

2. Élimination des cendres et nettoyage régulier

Allow the fire, embers, ash, ring and liner to cool completely. Remove ash with a suitable metal tool and clean loose residue with a soft brush or cloth compatible with the finish.

Avoid strong acids, strong alkalis, abrasive steel wool and pressure washing unless specifically permitted. Dry cutouts, seams and contact points after cleaning.

3. Précautions à prendre en cas de températures élevées

The heat-resistant coating is designed for 650–800°C, depending on the model and coating system. This range does not indicate a safe touching temperature or authorize excessive fuel loading.

Do not pour or spray water onto a hot ring. Allow it to cool naturally before touching, cleaning, covering, moving or inspecting it.

4. Coating & Rust Care

Inspect the inner wall, upper edge, lower contact area, seams and decorative cutouts for coating wear or corrosion. Repair suitable non-food-contact surfaces with a compatible high-temperature coating.

Keep the ring clean and dry when not in use. Areas exposed to ash, standing moisture or ground contact may require more frequent inspection.

5. Fasteners, Seams & Weld Inspection

Periodically inspect panel joints, bolts, seams, welds, liner supports and accessory contact points. Stop using the product if the ring is unstable or a structural part is loose, cracked or seriously deformed.

6. Seasonal & Long-Term Care

Remove ash and debris, clean the ring and liner, and dry all surfaces before covering or storage. Cover only when completely cool and dry, using a cover that does not trap persistent moisture.

For portable models, dry indoor storage is recommended during extended non-use or severe weather where practical.

7. Installation & Safety Limits

A fire pit ring is a boundary for an outdoor fire area, not a seat, step or load-bearing platform. Do not sit or stand on it, move it while hot, or leave an active fire unattended.

Use outdoors only, follow required clearances and local rules, and keep children, pets and combustible items away.

8. Calendrier d'entretien recommandé
  • Avant chaque utilisation : Check stability, joints, liner position, accessories and the surrounding fire area.
  • Après chaque utilisation : Cool completely, remove ash and debris, and dry cleaned surfaces.
  • Mensuel : Inspect the coating, upper and lower edges, cutouts, fasteners and corrosion-prone areas.
  • Tous les trois mois : Check seams, welds, panel joints, liner supports and site contact points.
  • Before covering or storage: Clean and dry the product and protect compatible surfaces.
  • Avant la prochaine saison : Reinspect the installation, ring, liner and accessories.

Foire aux questions

Is a fire pit ring a complete fire pit?

Not always. A ring defines and contains an outdoor fire area, but the base, liner, surrounding surface and installation requirements depend on the model and site.

What sizes are available?

The current collection includes 36-inch and approximately 90 cm round formats, a 66 cm hexagonal model and other dimensions. Custom sizing can be evaluated.

Can a fire pit ring be permanently installed?

Some buyers use rings in permanent or semi-permanent fire areas, while other models are portable. Suitability depends on the structure, site, surface and local requirements.

Is a liner included?

Selected models include an additional bonfire liner, while others may be supplied as the ring only. Confirm the configuration and accessory list before ordering.

Can the decorative pattern be customized?

Depending on feasibility, CNC-cut artwork can include wildlife, forest, geometric, seasonal, logo-based or market-specific designs. Artwork should be reviewed for structural strength and appropriate opening sizes.

Can a cooking grate be added?

Compatibility depends on ring structure, diameter and support design. Specify cooking requirements during development and use only a component designed as a food-contact surface.

Quelle est la quantité minimale de commande ?

The current listed models display a standard MOQ of 100 sets. Final MOQ may vary according to dimensions, structure, pattern, finish, accessories and packaging.

Combien de temps faut-il pour obtenir des échantillons et lancer la production ?

Le délai de livraison habituel pour les échantillons est de 7 à 15 jours. La production en série prend généralement entre 30 et 45 jours, en fonction de la conception, de la quantité et des exigences de personnalisation.

Are fire pit rings intended for indoor use?

No. These products are intended for outdoor use in appropriately ventilated locations. Do not use them inside homes, tents, vehicles or other enclosed spaces.

Quelles informations faut-il fournir pour obtenir un devis ?

Provide a target model or reference image, installation, required diameter and height, quantity, pattern, material and finish preferences, liner or accessory needs, logo and packaging requirements, destination country and delivery schedule.

Start Your Fire Pit Ring Project

Tell us your target dimensions, installation, decorative theme and order requirements. Our team will help you compare suitable ring structures and customization options.

Request a Fire Pit Ring Quote