Feuerstelle im quadratischen Sternmuster – Holzfeuerstelle mit pyramidenförmigem Schutzgitter für die Terrasse

  • Produktgröße:Brauch
  • Farbe:Schwarz, Akzeptiert benutzerdefinierte Farben
  • Mindestbestellmenge:100er-Set
  • Material:Metall-Eisen
  • Lieferzeit für Muster:7–15 Tage (abhängig von der Anzahl der Proben)
  • Lieferzeit:30-45 Tage (abhängig von der Anzahl der Bestellungen)
  • OEM/Anpassung:Es kann anhand von Bildern oder Mustern darauf verwiesen werden
  • Herkunftsort:Fujian, China
  • Import und Export :Hafen von Xiamen, Fujian, China
  • Zahlung:L/C, T/T

Produktübersicht

A square fire bowl brings order to a seating group: four straight edges line up with paving joints, deck boards and sofa runs in a way a round bowl rarely does. This one puts the decoration where people can actually see it — a star motif pierced through all four sides, with a pyramid-shaped mesh screen resting over the fire. At dusk the cutouts throw a broken pattern of light across the patio, while the mesh cone above the flames keeps sparks and loose embers inside the bowl.

Fuel is simple. This is a wood burning patio fire bowl in the plainest sense: split logs and kindling go straight into the bowl, air reaches them through the cutouts and under the screen, and the fire is lit with a match or a taper. There is no gas line, no regulator and no power supply to plan around, so the pit can sit on a patio, a gravel pad or a lawn edge and be moved again when the layout changes.

We supply it as a custom square fire pit rather than a fixed catalogue line. The footprint is made to your specification, the standard black finish can be replaced with a colour from your own range, and the star motif can be redrawn for a private-label programme or a hotel scheme. Distributors usually place a decorative piece like this at the centre of an outdoor-living range and keep plainer bowls at the lower price points around it; project buyers use it as the anchor for a terrace or a courtyard.

 

Wichtigste Merkmale

  • Star cutouts, pierced through the body. The motif is cut through all four panels instead of being printed or stamped onto the surface, so a star pattern firepit keeps its shape in daylight and projects light onto the ground once the fire is going. Every opening is deburred before finishing, so there is no sharp edge for a handler or an end user to catch a hand on.
  • A pyramid mesh screenover the flames. The screen sits as a shallow cone above the fire: sparks and embers strike the mesh and fall back into the bowl, wind is broken above the logs, and the fire stays visible instead of being hidden behind a solid lid. It lifts off in one piece when the fire needs feeding.
  • A four-sided body that suits straight layouts. Square panels sit flush with paving grids, deck boards and rectangular furniture, and they leave no curved gap between the fire and the seating. Flat faces also carry a cutout motif far better than a curved one, which is why the star shapes read so cleanly here.
  • Iron construction with a workmanlike finish. The body is built in Metal-Iron and coated, so soot, ash dust and the odd scuff from a log sit on the surface rather than working into it. The bowl is a welded iron shell rather than a pressed sheet, which is what keeps the corners crisp and lets the screen frame sit level on the rim.
  • Clear silhouettes for wholesale presentation. A square body with a repeated motif gives a clean front view, an obvious side profile and a detail shot that shows the cutouts, which is usually what a catalogue listing or a trade display needs to explain the piece in a few seconds.

 

Footprint & Sizing Guide

  • Measure the patio before the bowl. Sketch the paved or decked area to scale, mark walls, doors, steps and planting beds, then mark where chairs, benches or a sofa will sit. The clear distance between the nearest seat and the fire decides the footprint far more than the total area of the patio.
  • Decide what job the fire does in the layout. A custom square fire pit at the centre of a four- to six-seat group needs enough room behind the chairs for people to step back; the same pit pushed into a corner should keep two sides parallel to the paving edges so the square silhouette reads as intentional.
  • Follow the paving or deck module where you can. On slabs or boards, a square iron firepit sized to sit inside one whole unit or bay lands level, shows no cut edges under the frame and throws a straight line of shadow from the screen.
  • Check the height as well as the width. Measure from the ground up to any pergola beam, awning arm or low branch: the screen lifts off vertically when the fire needs feeding, so you need clear headroom above the bowl, not only clear floor around it.
  • Allow a service aisle on hospitality terraces. On a hotel or restaurant terrace, keep a walkway between the fire and the nearest table for staff carrying trays, and position the pit so a gust does not push smoke straight across the seating.
  • Go larger for open settings and smaller for tight ones. Long tables, courtyard centres and event lawns suit a bigger bowl that takes longer logs and spreads warmth further; a balcony, a narrow terrace or a pair of chairs suits a smaller bowl that two people can lift and shift.
  • Send the plan with your enquiry. A rough sketch with the footprint in mm, seat positions, overhead clearance and the paving module is enough for us to return a drawing with the bowl size, screen height and mesh pitch for approval before anything is made.

 

Patio & Backyard Settings

  • Patio seating circles. On a paved patio a star pattern firepit sits at the centre of four or six chairs, and the square body lines up with the paving grid instead of sitting at a careless angle. This is the setting most commercial buyers picture: the fire is lit after dinner, sparks stay behind the mesh, and the bowl is left to cool before it is swept out.
  • Garden and lawn edges. At the end of a lawn, on a gravel pad or against a low wall, a square iron firepit works as a destination rather than a utility. Four straight sides let it sit tight to a hedge line or a planter without the gap a round bowl leaves behind, and the firelight through the cutouts marks the spot from the house.
  • Hotel and resort terraces. On a hospitality terrace the same wood burning patio fire bowl becomes part of evening service: staff top up logs with a poker, the screen keeps guests away from open flame, and the motif gives the terrace a focal point before the fire is even lit.
  • Showroom floors and seasonal displays. Garden centres and e-commerce sellers get a piece with an obvious front view, a recognisable motif and a shape that displays squarely on a plinth or a deck without needing to be dressed up with props.
  • Events and outdoor dining. Event and rental operators tend to want two things — a fire that holds its shape through a long evening of use, and a piece that looks intentional in a marquee or on a temporary terrace. A square iron body with a repeated motif does both without a permanent fire feature being built into the site.

 

Finish & Seasonal Care

Ash and the bowl

Let the fire burn down and the bowl cool completely before you empty it — ash holds heat for hours after the flames are gone. Tip it into a metal container rather than a bin, and leave a thin layer in the bottom as a bed for the next fire, which helps the first logs catch. Never tip water into a hot bowl: the shock is hard on any iron body, and the steam carries ash with it.

Cleaning the coated panels

Once the pit is cold, wipe the outside with a damp cloth and a little mild soap, then dry it. Abrasive pads and wire brushes take the coating off along with the soot and are rarely needed, because most marks lift with warm water. Soot inside the bowl and around the cutouts is normal and does not have to be scrubbed back to bare metal.

Patina at the cutouts

A square iron firepit will darken first at the cut edges and in the bowl, where the coating takes the most heat. Expect it and show it in your photography — buyers who know outdoor fire pits read that colour as a sign the piece has been used properly, not as a fault.

Wet seasons and storage

Through the wet months, cover the pit with a breathable cover or move it under shelter, and make sure the bowl is dry before it is wrapped, because trapping moisture under a cover is what starts finish problems. In season, tip rainwater and wet ash out after a storm rather than letting them sit in the bottom of the bowl.

Screen care

Brush soot off the mesh with a soft brush and check that the frame still sits level on the rim. Do not stand the screen on its cone or stack anything on it between uses, and store it flat if the fire pit is put away for winter.

Everyday safety

Burn outdoors only, on a non-combustible surface, and keep the pit clear of overhangs, fences and dry planting. Keep children and pets away from the bowl even after the fire is out, and leave the screen in place whenever the fire is burning.

Lass uns in Kontakt treten

Schreiben Sie uns, senden Sie uns eine E-Mail oder noch besser: Kommen Sie vorbei und sagen Sie Hallo!

Name

Technische Daten

Produktgröße Custom, built to your drawing or sample
Body shape Square, with four flat side panels
Material Metall-Eisen
Farbe Black as standard; custom colours accepted
Cutout motif Star pattern, pierced through every side panel
Spark control Pyramid mesh screen
Screen profile Shallow open pyramid in metal mesh
Body finish Coated iron surface
Supplied with Iron fire bowl, pyramid mesh spark screen, fire poker
Typical setting Outdoor patio, terrace, deck, gravel pad or lawn edge

 

 

Anpassungsprozess

  1. Send the reference and the brief. A photograph, a sketch, a sample piece or a technical drawing is enough to start; say what the custom square fire pit has to fit — footprint, seating height, finish and the quantity you plan to run.
  2. Turn the reference into a production drawing. We set the size and spacing of the motif, the height and pitch of the screen, and the position of the cutouts relative to the rim, then send the drawing back for your mark-up.
  3. Approve a sample before the run. Look at the motif from arm’s length and from across a terrace, check the edges of the cutouts and the fit of the screen, and approve the piece that will set the standard for the batch.
  4. Sign off the finish on a physical panel. Coating is matched against a panel rather than a screen, under daylight as well as indoor light, so the black or the colour you choose is the one that goes into production.
  5. Agree the packing. Carton size, protection for the mesh cone, and any barcode, carton mark or inner label your warehouse or marketplace needs are settled before production starts.
  6. Run the batch with checks in line. Weld continuity, mesh tension, cutout edges and coating coverage are checked as the pieces come through, and the finished batch is compared against the approved sample before it is packed.

 

Buyer Support & Inspection

Quotation and layout drawing

Every enquiry comes back with a written quotation and a simple layout drawing covering bowl size, screen height, mesh pitch, finish and packing, priced for the quantity you name. Anything that depends on your order — a colour outside the standard black, a motif redrawn from your artwork, a non-standard carton — is written on the quote rather than left for later, so the figure you approve is the figure you are invoiced against.

One contact through production

You deal with one person from drawing to shipment. They confirm the approved sample is on the line, send photographs at the welded-shell stage, again after coating and once more before the cartons are sealed, and answer questions about motif spacing or screen fit without passing you between desks.

Inspection before the container closes

Pieces are checked against the approved sample: cutout edges deburred, welds continuous, the pyramid mesh screen resting level on the rim, coating coverage even across all four panels, and one bowl, one screen and one poker counted into every set. Photographs of the batch and the packing list go out before the container is closed, and a third-party inspection can be booked if your own process calls for one — tell us at order confirmation so it fits the schedule.

Export documents and carton marks

Packing list, commercial invoice and the export paperwork for the shipment are prepared to match the order, and any barcode, carton mark or inner label you supply is applied during packing rather than added afterwards.

If a carton arrives damaged

Photograph the carton and the part before unpacking any further, and send the images with the carton mark. A replacement bowl, screen or poker is quoted against your next shipment, and holding on to the damaged piece until the claim is settled makes the check quicker for both sides.

Spares and repeat runs

Spare pyramid mesh screens and pokers can be packed with a repeat order, so a display model or a hotel terrace can be refreshed without buying a full new set. For repeat runs we keep the approved sample and drawing on file, so the second batch matches the first in motif, coating and screen fit.

 

Bestellung und Lieferung

MOQ 100 Sets
Payment L/C, T/T
Beispiel für die Lieferzeit 7-15 days, depending on the number of samples
Lieferzeit 30-45 days, depending on the number of orders
Port of export Xiamen, Fujian, China
Herkunftsort Fujian, China
OEM/customization Worked from your pictures or a physical sample
Customisation scope Size, body colour and star motif
Sample charge Confirmed when the sample request is placed
Trade terms Agreed at order confirmation

 

 

Lieferkette und Liefersicherheit

Decent Crafts has been sourcing and exporting from Quanzhou, Fujian since 2008, and goods leave through the port of Xiamen. We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.

 

Häufig gestellte Fragen

Q1. Does the pyramid mesh screen lift off when I need to add logs?

Yes. The pyramid mesh screen sits over the bowl as a single piece and lifts away for loading and for rearranging logs with a poker; put it back before the fire is left to burn. The mesh catches sparks and embers and lets them drop back into the bowl, and because it is mesh rather than solid steel you can see the fire through it.

Q2. How visible is the star motif once the fire is lit?

The cutouts go right through the body, so on this star pattern firepit the motif reads two ways: as a dark shape against the iron in daylight, and as a pattern of light thrown onto the patio once the flames are up. From a few steps back you also see the fire itself through the mesh cone.

Q3. Can the motif, size or colour be changed for our own range?

Yes. Sizes are made to order, the standard black finish can be swapped for a colour you specify, and the star pattern can be replaced with a motif worked from your artwork or a physical sample. Send the reference with your first enquiry so the custom square fire pit is specified against a real drawing rather than a description.

Q4. What wood should I burn in it?

Seasoned hardwood, split to a size that fits the bowl, is the easiest fuel to control; kiln-dried logs light quickly and burn cleanly for a display or a demo fire. Avoid painted, treated or laminated timber, and go steady on resinous softwoods if the pit sits under a pergola, because they spit. This is a wood burning patio fire bowl, so plan for logs rather than a charcoal or gas conversion.

Q5. Can it stay outside all year?

A square iron firepit is built for outdoor use, but like any iron bowl it performs well with a little attention in the wet season. Standing water and wet ash left in the bowl are what shorten a finish, so cover the pit or move it under shelter, dry the bowl before covering, and expect the interior and cut edges to take on a darker patina with use.

Q6. How do I work out the size to specify for a patio?

Start with the space rather than the bowl: the clear distance to the nearest chair, wall or walkway, and whether the fire will be the centre of a seating circle or a corner feature. Send those measurements with your enquiry and we will confirm a footprint that leaves comfortable room to move around the fire.

anständige Handwerkskunst des sonnigen

Uhr

Schwarz, Akzeptiert benutzerdefinierte Farben

Größe

Brauch