Maßgefertigtes Brennholzregal vom Hersteller – wetterbeständige Metallkonstruktion für den Einsatz auf der Terrasse und im Garten
- Produktgröße:Brauch
- Farbe:Schwarz, Akzeptiert benutzerdefinierte Farben
- Mindestbestellmenge:100er-Set
- Material:Metall-Eisen
- Lieferzeit für Muster:7–15 Tage (abhängig von der Anzahl der Proben)
- Lieferzeit:30-45 Tage (abhängig von der Anzahl der Bestellungen)
- OEM/Anpassung:Es kann anhand von Bildern oder Mustern darauf verwiesen werden
- Herkunftsort:Fujian, China
- Import und Export :Hafen von Xiamen, Fujian, China
- Zahlung:L/C, T/T
Produktübersicht
A firewood rack is the quiet piece of a fire pit set-up. Nobody photographs it, but it decides whether the space looks cared for while the fire is being fed. This one is a round metal-iron basket with a deep open body, a mesh wall and a stable base. Logs stand upright inside it instead of lying in a heap on the ground, air moves through the load, and the next piece is within arm’s reach when the fire needs it. Black is the standard finish, and size is made to your specification, so the same design serves a small courtyard and a long terrace without turning into two different products.
For buyers building an outdoor heating range, the rack earns its place on the shelf and in the carton. It is the natural companion to a wood-burning bowl: someone choosing a pit almost always needs somewhere to keep fuel, and a matched pair sells as a scene rather than as two loose items. Distributors, garden centres, private-label brands and hospitality suppliers order it for exactly that reason — it adds a useful item to the order without asking the buyer to learn a new category. Size, colour and detailing are all open to specification, which is what makes this a custom weather resistant firewood rack rather than a catalogue size you have to talk a customer into.
Day to day it is used the way a woodpile is used: filled when the fire is lit, emptied of bark and dust at the end of an evening, and left outside between seasons. An open structure suits that routine, because a load that breathes is easier to keep dry and easier to see at a glance. Stand it beside the pit, on the same paving, and the rack becomes part of the seating area instead of something hidden behind a wall.
Wichtigste Merkmale
- Mesh body that lets the load breathe. The wall is open mesh rather than a solid panel, so air moves through the stack and surface damp dries off instead of sitting against the wood. That is the difference between fuel that lights cleanly and fuel that spits and smoulders.
- Deep basket, fewer trips. Logs stand upright inside a deep body, so an evening’s wood goes in at once and the pile does not spill across the paving every time a piece is pulled out.
- Stable base on real ground. The base is a broad, flat platform rather than a set of thin legs, which keeps the basket upright on brick, flagstone and paving that is not perfectly level.
- Built to your size. Every unit is made to the dimensions you specify, which is why this works as a custom metal log rack for patio layouts where a standard basket is either too wide for the wall or too small for the fire.
- Welded metal-iron frame, black as standard. Joints are welded and the frame is finished in black; custom colours can be agreed where a range needs to sit together on the shelf.
- Open top, no lid to fight with. Loading and unloading happen from above, one-handed, with a log in the other hand — the detail that matters most when somebody is actually feeding a fire.
Lass uns in Kontakt treten
Schreiben Sie uns, senden Sie uns eine E-Mail oder noch besser: Kommen Sie vorbei und sagen Sie Hallo!
Technische Daten
| Produkttyp | Round open log basket |
| Shape | Round |
| Produktgröße | Brauch |
| Material | Metall – Eisen |
| Wall | Mesh |
| Top | Open |
| Base | Flat |
| Farbe | Standardmäßig schwarz; Sonderfarben erhältlich |
| Fuel | Split logs and kiln-dried firewood |
| Anpassung | Worked from your pictures or a physical sample |
| Herkunftsort | Fujian, China |
| Typische Anwendung | Patio, garden, backyard and fireside log storage |
Metal Build & Weather Behaviour
Metal-iron is the right material for something that lives outside: it takes a weld, holds its shape under a load of wood, and does not need to be babied. The frame is welded where the wall meets the base and the rim, because those are the points that take the strain when a full basket is dragged a few inches across paving. The mesh is not decoration — it is what gives the basket its rigidity without adding bulk, and it is why a filled rack can be lifted and repositioned by two people without the body twisting out of line.
Weather resistant, in practical terms, means the frame is built and finished to stay outdoors through the seasons rather than to be packed away after every use. It does not mean the metal is immune to water. Any bare or chipped spot on a ferrous frame will mark once moisture sits on it, and a garden with salt air, sprinkler overspray or constant shade dries far more slowly than a sun trap. Because this is a custom metal log rack for patio and garden settings, the finish is worth settling before production: tell us the conditions the rack will live in, approve a physical colour sample, and the coating that ships is the coating you signed off.
What we ask buyers to check when a sample or a first carton arrives is simple. Look at the welds for full penetration and no sharp spatter, run a hand along the rim and the top edge of the mesh, set the base on a flat floor and see whether it rocks, and look at the finish in daylight rather than under warehouse lighting. Those four checks catch almost everything and take five minutes per carton.
Where the rack stays out all year, plan on an annual inspection rather than a weekly one. Chips, scratches and the first dulling of the surface are the early signals, and a touch-up at that stage is a two-minute job. Under a roof, on a covered porch or in a mild climate, the same frame holds its appearance far longer.
Anpassungsprozess
- Start with a reference. A photograph, a sketch with dimensions or a physical sample is enough to begin; as a Hersteller von Brennholzregalenwe work from pictures and samples rather than pushing you into a fixed catalogue size.
- Fix the footprint. Tell us the width and height you need and where the rack will stand — beside a pit, against a wall, on a narrow balcony — and we will confirm proportions that stay stable at that size, including the diameter of the base.
- Choose the colour. Black is standard, and custom colours are accepted. Matching an existing fire pit range is the usual request, so send the reference you want us to hit.
- Decide the detailing. Rim shape, mesh spacing, base style and whether a logo plate or handle is needed can all be discussed at this stage, and each one is written into the specification before anything is made.
- Approve the sample. The pre-production sample is your check on size, colour, weld quality and edge finish. Bulk production runs against the signed-off sample, so this is the step to take slowly.
- Lock the specification. The approved sample, the colour reference and the size drawing become the standard for the whole order, so a reorder six months later matches what you first received.
Applications & Placement
- Beside the fire pit on a paved patio. The obvious spot and the one that drives the paired purchase: the rack sits at the edge of the seating circle, close enough to reach without standing up, far enough that sparks never land in the wood.
- Covered porch or veranda. Under a roof the basket keeps its load dry and doubles as a log store for an indoor fireplace, which is how many households end up with a second one.
- Garden wall, path edge or courtyard corner. A round basket reads well against straight lines — fences, walls, steps — and a custom weather resistant firewood rack can be sized into a gap that a rectangular store will not fit.
- Hospitality terraces and rental properties. Staff need a store that is filled once, emptied at closing and wiped out without fuss; the open top and mesh wall make that a one-person job.
- Exposed and coastal gardens. Where wind and salt air do the damage, the specification conversation matters more than the shape — describe the conditions and we will build and finish for them.
- Showroom floor and seasonal sets. The rack sits next to any pit in the range, and a firewood rack manufacturer supplying both can align finish and scale so the two read as one set rather than as unrelated items.
Gebrauch und Pflege
- Load dry, split, seasoned wood. The basket is a store, not a dryer; wood that goes in wet stays wet in the middle of the pile even with air moving around the outside.
- Fill to the rim, not above it. Overloading pushes the mesh out of shape and makes the basket top-heavy when someone leans on it to reach a log.
- Empty and brush out the base after an evening’s burn. Bark, grit and ash hold moisture against the metal; a stiff brush takes ten seconds and is an effective routine step for protecting the finish.
- Wipe, never soak. A damp cloth with a little mild soap handles marks, and the surface should be dried straight away — standing water in the base is what starts a rust bloom.
- Touch up chips as you find them. Clean and dry the spot, then apply a compatible metal touch-up paint matched to the finish; stopping a chip early keeps it from creeping under the coating.
- Cover or move it for the off-season. If the rack stays out through winter, tip it so rain cannot collect in the base or bring it under cover; a breathable cover is better than a sealed one, which traps condensation against the frame.
Bestellung und Lieferung
| Mindestbestellwert | 100 Sets |
| Beispiel für die Lieferzeit | 7-15 days, depending on the number of samples |
| Produktionsdurchlaufzeit | 30-45 Tage, abhängig von der Bestellmenge |
| Payment | L/C, T/T |
| Export port | Port of Xiamen, Fujian, China |
| Order scope | Single models or a mixed programme with other items in the range |
| Colour matching | To a colour reference or approved sample you supply |
| Logo and carton | Agreed per order |
Packing & Container Loading
- Round baskets are packed as a complete unit: the body is braced so the mesh cannot be pushed in, the base travels with it, and the rim is protected against rubbing. Because the rack is made to your size, the carton is set from the approved sample rather than chosen from a stock box.
- The packed drawing is the document to ask for. It shows the basket’s packed height, packed diameter, how the base sits inside the carton and where the protection goes. Approve that drawing with the sample, and the first carton will match what you signed off.
- Sets per carton is confirmed per size, not guessed from a photo. A shallow basket and a tall basket of the same diameter do not pack the same way, so we calculate the figure from the final packed dimensions and state it on the carton drawing.
- Container loading is calculated from that carton. Once the packed size is fixed, we return a loading plan for a 20ft or 40ft container, with allowance for pallets, corner boards and any fire pits or garden items travelling in the same shipment.
- Freight per unit follows the packed volume. Divide the carton volume by the number of sets per carton, then add the share of pallet and container space; that is the number to use when comparing a custom weather resistant firewood rack against a stock basket. It is also why we settle packing before quoting a delivered price.
- Mixed orders are planned by model. Rack cartons are grouped and kept accessible for inspection instead of being buried under heavier fire pit cartons, and the loading plan shows where each model sits.
- For a first loading estimate we need the final diameter, final height, colour split and destination port. The firm figure comes after the sample and carton are approved, because that is when the packed size stops moving.
Selection & Buyer Support
| Buyer situation | Configuration to start with | Support that comes with it |
| Fireside on a paved patio | Mid-height round basket with an open top and flat base | Colour matched to your fire pit; the sample is photographed beside the pit so scale is clear before you commit |
| Narrow balcony or wall gap | Tall, narrow basket with a base wide enough to stay stable | We check the footprint and centre of gravity before the sample is made, and adjust the base with the height |
| Covered porch with an indoor fireplace | A compact basket for the porch plus a larger store for the season’s wood | Both sizes are sampled together so they read as one range rather than two unrelated buys |
| Garden centre or distributor shelf | Two black sizes, plus one custom colour for the range | Carton marking and a packing photo you can use when checking the first delivery against the listing |
| Hotel or restaurant terrace | A larger basket sized for daily refilling and staff handling | Rim finish, mesh and base are checked on the sample, and a pre-shipment inspection can be booked before packing |
| Private-label programme | Your colour, logo plate or tag, and your carton mark | Artwork review, colour reference and a signed sample held on file, so a reorder is checked against the same standard |
| Exposed or coastal garden | The same basket shape with a finish agreed for the conditions | A colour sample viewed in daylight and a simple care note for the end user |
Lieferkette und Liefersicherheit
Decent Crafts has been sourcing and exporting from Quanzhou, Fujian since 2008, and goods leave through the port of Xiamen. We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.
Häufig gestellte Fragen
Q1. Does an open mesh basket really keep logs dry?
It keeps them far drier than a heap on the ground, but it is not a sealed store. Air moving through the mesh carries surface moisture away and stops the pile sweating, which is what you want for the wood going into the fire this week. For a wet winter, stand the rack under a roof or a breathable cover and work through the oldest logs first, keeping new deliveries on top.
Q2. Can this custom weather resistant firewood rack be made to fit a narrow space?
Yes — size is the first thing we settle. Give us the width and height available, say whether the rack sits against a wall or in the open, and we will confirm a diameter and base that stay stable at that footprint. Tall, narrow baskets are possible, but the base has to grow with the height, so the two dimensions are agreed together rather than separately.
Q3. How does the black finish hold up outdoors?
It is built to stay outside through the seasons rather than to be packed away after each use, but metal-iron is not rust-proof and we will not pretend otherwise. Expect the surface to dull gradually in sun and rain, and expect a chip or scratch to mark first. Clean and touch up chips as they appear and the frame stays presentable for years; leave one open in a wet, shaded garden and it will bloom. Coastal air and sprinkler overspray shorten the interval, so inspect once a year in those conditions.
Q4. How does an open basket compare with a closed log store?
A custom metal log rack for patio use is open at the top and around the sides, so it is quicker to fill, quicker to empty and much easier to see how much stock is left. A closed store keeps wood drier over months but hides it and is slower to load. Most buyers want the open basket at the fireside for the wood being burned this week, with a closed store elsewhere for the season’s supply.
Q5. Can the rack carry our own logo and colour?
Black is the standard colour and custom colours are accepted. A logo plate, a branded tag or a specific finish matched to your existing range can all be reviewed — what is practical depends on how the mark is applied and where it sits on the frame, so send the artwork and we will confirm. As a firewood rack manufacturer we also build from pictures or samples, so a rack you already sell can be the starting point for your own version.
| Uhr | Schwarz, Akzeptiert benutzerdefinierte Farben |
|---|---|
| Größe | Brauch |


























