カスタマイズ可能な裏庭用ファイヤーピット 耐久性に優れた通気性のある土台 美しい炎の演出
- 製品サイズ:カスタム
- 色:黒、カスタムカラー対応
- 最小注文数量:100セット
- 材料:金属-鉄
- サンプル納期:7~15日(サンプル数による)
- 納期:30~45日(注文数によって異なります)
- OEM/カスタマイズ:写真やサンプルを参考にすることができます
- 原産地:中国福建省
- 輸出入:中国福建省厦門港
- 支払い:L/C、T/T
Ventilated Base & Flame Display
- Air from underneath. The base is cut with openings below the fuel bed, so the fire draws oxygen from under the wood as well as from the open top. It is the difference between a fire that needs ten minutes to establish and one that catches in two or three.
- Openings around the body. The pattern in the bowl is not only decorative: the cutouts let air move through the sides as well, feeding the fire along its length rather than only at the centre.
- A taller, livelier flame. With a steady air supply the wood burns as flame rather than char, so the fire stands up and moves, and the light thrown through the cutouts shifts through the evening.
- Load it loosely. Lay split logs in a criss-cross with gaps for air. A tightly packed bowl starves the base vents and puts the fire out.
- Refuel in small amounts. Two or three split logs at a time keep the air path open; tipping in a full bag smothers the fire and throws smoke.
- Size the fire to the bowl. A good fuel bed covers the centre without pressing against the walls — oversized loads against cold iron smoke before they burn.
- Mind the wind. Site the pit so the usual evening breeze crosses the seating rather than driving into it. The base does the drawing, but it cannot argue with a gust.
- Most fire pits look right in a photograph and disappoint on the first cold evening: the wood sulks, the smoke follows whoever moves, and the flame stays flat. This ventilated iron fire pit is built the other way round. The bowl sits on a ventilated base, pierced so air reaches the fuel from below and around the fire, and that is what lets the wood catch quickly, keep drawing and settle into a tall, moving flame instead of a smoulder. The bowl is metal-iron, powder-coated in black as the standard finish, with custom colours available to match a range or a project palette. A cutout pattern runs around the body, so once the fire is going the light comes through the sides and the pit reads as a lit object in the garden rather than a container for wood. It burns dry wood outdoors — no gas line, no bottle, no ignition to fail — so the whole unit is a bowl, a base and the fire you build in it. Size, colour and pattern are made to order, which is what lets the same design serve a wholesale range, a landscaped residential scheme or a single hotel terrace.
Iron Body & Finish
On a custom ventilated fire pit, the bowl takes the full heat of the fire every time it is lit, so the iron and the coating do most of the long-term work. The body is formed from metal-iron and welded into the bowl-and-base shape, then finished with a powder coating that stands up to heat and weather and gives the pit its flat black look. Custom colours are matched to your reference, so a commercial range or a hotel scheme can carry its own palette instead of black by default. The cutout pattern is cut into the bowl before coating, and the welds at the rim and the base are cleaned back before the coating goes on — a rough weld is where a finish fails first. No coating on a wood-burning iron fire pit stays perfect forever. Heat cycling, ash and wet weather will dull the surface over time, and the rim and the weld lines are usually the first places to show it. That is normal behaviour for the material rather than a fault, and it is why the standard finish is a matte black that hides soot and ash between cleanings.
Size, Footprint & Placement
- Start with the standard build. 60 × 63 × 60 cm is the reference size; a wider, shallower or taller bowl is quoted to your drawing or sample, so a scheme can keep the same pattern at a different diameter.
- Measure the living space, not just the pit. A ventilated backyard fire pitonly works if chairs can sit around it and people can still walk behind them — mark the circle out with tape before you settle on a size.
- Match the rim to the seating. A rim close to knee height warms hands and faces from dining or lounge chairs; a taller pit suits standing gatherings and bar-height seating.
- Choose the surface first. Stone, concrete or gravel is straightforward. On timber decking, stand the pit on a non-combustible pad and check what the deck owner and local rules allow for open fires.
- Keep the space above clear. Branches, awnings, pergola roofs and parasols have no place directly over a wood-burning fire pit.
- Think about the evening wind. The base needs air, not a gale: place the pit so the prevailing breeze carries smoke away from the seating arc.
- Plan the carry. Empty the bowl first and lift with two people; a bowl on a base is not a one-person move, and the route from store to patio should be wide enough.
- Repeat the design across a scheme. For several terraces, the same design can be ordered in two or three sizes so a communal courtyard and a private terrace match.
Backyard & Hospitality Use
The obvious setting is a family backyard — a stone patio, four chairs, a fire lit after dinner that has to catch quickly and behave while children run around it. Guesthouses and small hotels put the same pit on garden terraces, where guests sit after dinner and the lit pattern reads from across the lawn; ordering it in a colour that matches the property’s furniture is a small change with a large effect. Restaurant and café patios use it as a reason for people to stay for a second drink once the evening cools, and event venues like the way the cutouts turn the bowl into a lantern after dark.
Landscaped residential projects order it to a drawing: a wider bowl for a communal courtyard, a smaller one for a private terrace, the same pattern repeated through the scheme so the gardens read as one design. Distributors and trade buyers take it as one style within a fire pit range that also covers tripod, pedestal, folding-leg and mesh-guard forms, and vary colour or pattern between seasons to keep a catalogue entry fresh. Because the pit is built to order by a backyard fire pit manufacturer, a hotel group and a distribution range can take different sizes from the same design without starting over.
Use & Care
- Burn dry, seasoned hardwood. Split it to a size that suits the bowl and skip resinous softwoods that throw sparks and leave sticky residue.
- Never burn rubbish. Painted or treated timber, plastics and household waste burn dirty and leave a residue on the bowl that is hard to remove.
- Let it cool completely. Leave the pit overnight before you touch the ash or clean the bowl; warm ash can stay live for hours.
- Empty cold ash into a metal container. Keep the base openings clear as you go, so the air path the pit depends on stays open.
- Clean the finish gently. A soft brush or cloth with mild soapy water, then rinse and dry. No abrasive pads, steel wool, acid or alkaline cleaners, and no pressure washer.
- Touch up bare spots. A little matching paint on chips before the wet season stops a small mark becoming a rust patch.
- Cover it when it is idle. If the pit stays outside between seasons, cover it or move it under cover, and check the finish more often in coastal or humid air.
- Keep the zone clear. A wood-burning fire pit needs nothing combustible within reach, no overhanging branches and no use indoors, in a tent, under an awning or in any enclosed space. Supervise children and pets, keep water or sand nearby, and never leave a burning fire unattended.
つながりましょう
お気軽にご連絡ください。メールをお送りいただくか、直接お越しいただいてご挨拶いただければ幸いです!
お問い合わせ 現在では、折りたたみ式グリル、省スペース設置、OEMサポートを備えた壁掛け式屋外用ファイヤーピットをカスタマイズして、現代的な屋外環境に対応しています。.
仕様
| 仕様 | 詳細 |
| 材料 | 金属・鉄 |
| 終了 | Powder-coated |
| 色 | Black as standard; custom colours matched to your reference |
| 製品サイズ | Made to order; standard build 60 × 63 × 60 cm |
| Cutout pattern | Cut to your design, around the bowl body |
| 燃料 | Dry wood; outdoor use only |
| OEM/customisation | Referred to according to pictures or sample |
| Typical settings | Garden and patio seating, hotel courtyards, landscape and hospitality schemes |
| 原産地 | 中国・福建省 |
| Port of loading | 中国・福建省・アモイ |
| 注文数量 | 100 sets per order, minimum |
| 納期例 | 7~15日(検体の数によって異なります) |
| 生産リードタイム | 30–45 days, depending on order volume |
| 支払条件 | 信用状、電信送金 |
カスタマイズプロセス
- Send what you have. A photo of a pit you like, a sketch, a technical drawing or a physical sample — OEM and custom work here is built from pictures or from a sample, so a reference is the fastest way to start.
- Fix the variables in one brief. Bowl diameter and height, base style and vent openings, cutout pattern, colour (black or a custom match), logo placement, packaging and carton marks. Each one is quoted before anything is cut.
- Approve a sample. We build a custom ventilated fire pit to the agreed spec so you can check the pattern, the coating and the way the fire draws before committing to a full run.
- Sign it off in writing. Size, colour and pattern are confirmed at this point; changes after approval mean rework and a later ship date.
- Produce against the approved sample. The sample becomes the reference for the whole order — pattern and finish are checked against it, not against a catalogue photograph.
- Inspect before packing.
ご注文・配送
- Confirm the quantity. The minimum order for this pit is 100 sets. If your first order is a smaller trial run, raise it with your sales contact — mixed sizes and colours can be discussed in the same enquiry.
- Book the sample. Sampling takes 7–15 days depending on the number of samples involved. Ask your sales contact about sample availability and the terms that apply at the time.
- Plan production. Bulk delivery runs 30–45 days depending on the number of orders in the queue. Book early if the goods have to land before a peak season, and confirm the approved sample in writing first.
- Agree the payment terms. L/C and T/T are both accepted; the exact terms and Incoterms are confirmed on the proforma invoice.
- Agree the packing. Coated metal bowls are cartoned with edge and rim protection and braced inside the carton. Several sizes or colours can be consolidated into one shipment with the loading plan and carton marks agreed with you.
- Arrange inspection. We check finish, pattern, base openings and hardware before packing, and a third-party inspection at our end can be arranged if your process calls for one.
- Ship from Xiamen. As a backyard fire pit manufacturer and export supplier we confirm documents, sailing details and delivery terms with you before the container is booked.
サプライチェーンおよび配送の確実性
Decent Crafts has been sourcing and exporting from Quanzhou, Fujian since 2008, and goods leave through the port of Xiamen. We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.
よくある質問
How does the ventilated base change the way the fire burns?
The base is pierced below the fuel bed, so air reaches the underside of the wood as well as the top. That is what lets a ventilated backyard fire pit catch quickly and keep drawing, burning as flame rather than sitting in its own smoke. You still need dry wood and a loose stack — pack the bowl tight and you block the air path the base is there to provide.
What wood should I burn, and how much at a time?
Dry, seasoned hardwood, split into pieces that suit the bowl. Load two or three logs at a time in a loose criss-cross and add more as they burn down; a wood-burning fire pit filled to the rim smothers itself and smokes. Avoid painted or treated timber and household waste — they burn dirty and leave residue on the bowl.
Will the powder-coated finish rust outdoors?
The coating protects the iron and is made to sit outdoors, but no coated iron fire pit stays flawless once it is burned in and left out. Heat cycling and wet weather dull the surface over time, and the rim and welds usually show it first. Clean it gently, touch up any chips before the wet season and cover it when it is idle — that is what keeps a working finish on the bowl season after season.
Can I change the size, colour or pattern?
Yes. Size, colour and cutout pattern are all made to order, and logo and packaging can be added. A backyard fire pit manufacturer works from a reference: send a drawing, a photo or a physical sample with your target dimensions and colour, and we will confirm what the bowl and base can do at that size before quoting.
Can it sit on a timber deck?
It can, with precautions. The bowl gets hot and embers can escape an open fire, so stand it on a non-combustible pad or a paved area rather than directly on the boards, keep it out from under railings and awnings, and check what your local rules allow for open fires on decks. Never leave it burning unattended, and keep a bucket of water or sand within reach.
How is the cutout pattern made, and can it be my own design?
The pattern is cut into the bowl before coating and the cut edges are dressed, which is how a fine design holds its shape around the curve. Your own artwork can be used: a custom ventilated fire pit is built from a drawing, a photo or a sample, and we will tell you what level of detail the bowl size can carry before the pattern is cut.
| クロック | 黒、カスタムカラー対応 |
|---|---|
| サイズ | 60×63×60cm |

























