パティオや裏庭での薪焚きに最適な、カスタムメイドの丸型鉄製ファイヤーピット。メタルデザインでコンパクトサイズ。

  • 製品サイズ:カスタム
  • 色:黒、カスタムカラー対応
  • 最小注文数量:100セット
  • 材料:金属-鉄
  • サンプル納期:7~15日(サンプル数による)
  • 納期:30~45日(注文数によって異なります)
  • OEM/カスタマイズ:写真やサンプルを参考にすることができます
  • 原産地:中国福建省
  • 輸出入:中国福建省厦門港
  • 支払い:L/C、T/T

製品概要

Some patios only have room for one thing at a time, and this pit is shaped for that. It is a compact round iron fire pit: one iron bowl in a black finish, with nothing projecting past the circle of the rim. That footprint is what makes it useful on a townhouse terrace, in a narrow city garden, or on the paved corner of a backyard where a wide fire table would block the route from the back door to the garden tap.

Day to day it is simple to run. Stack dry logs in the bowl, light them, and the open round shape gives everyone sitting around it a clear view of the fire without leaning in. There is no gas line to run and no ignition to fail. When the evening ends, you let the fire burn down and tip the cold ash out the next morning.

It suits two kinds of buyer. Homeowners use it as the center of a small seating group: two chairs, a low table, and the pit between them. Trade buyers — garden suppliers, importers, guesthouses and landscape contractors — choose it because a compact bowl stores and ships more easily than a wide one, fits the courtyard terraces city customers actually have, and can be built to their own dimensions instead of being taken from a fixed catalog.

 

主な特長

  • Compact circular footprint. The unit stays inside the circle of its own rim, so chairs can be pulled close on a narrow patio and the walkway behind them stays clear.
  • Round open bowl. Logs load from any side, the fire draws evenly across the bowl, and every seat in the circle gets an unobstructed view of the flames.
  • Iron bowl with a black finish. Black reads quietly against stone, gravel, decking and planting, hides soot marks better than pale tones, and can be changed to another color for a private-label range.
  • A genuine wood burning fire pit. No gas bottle, no electricity and no connection to arrange, which is why it suits gardens far from an outdoor socket and sites where a bottled-gas appliance would need its own approvals.
  • Built to your dimensions. You are not tied to one bowl size: a custom round iron fire pit can be made narrower for a compact courtyard or wider for a hotel terrace, with the depth set to how you want it to burn.
  • Nothing to service. There are no burners, hinges or moving parts to maintain; the bowl wipes out, the ash tips away, and the unit is ready for the next evening.

 

素材と作り

The bowl, rim and legs are formed from metal-iron, welded, dressed back at the seams and then finished in black. Iron suits this shape because the bowl has to carry a bed of burning logs night after night: it takes the heat, expands and contracts with every fire, and settles back into shape rather than deforming.

Welds are ground back far enough that a cloth does not catch when the bowl is wiped out, and the legs are set so the bowl sits level on paving, gravel or a stone pad. Black is the standard color, and it is the one most buyers keep in stock, because a dark bowl settles into a planted border and does not show soot the way a pale one does. Other colors can be matched to a panel, a painted chip or a reference photo.

Gauge, bowl depth and leg height are not fixed catalog numbers on this model; they are set per order. As a round iron fire pit supplier working with importers and brand owners, we keep those figures and the finish notes with your order, so a repeat run matches the batch you approved the first time.

 

Placement & Space Planning

  • Townhouse terrace. Two chairs and a low table sit comfortably around a compact round iron fire pit without it pushing into the doorway or the path to the garden tap.
  • Courtyard and city garden. On paving the bowl needs nothing more than a level spot; on gravel or grass, set it on a stone pad so it stays level and the ground underneath is protected.
  • Guesthouse and restaurant terraces. A row of pits marks out separate seating zones without any permanent build, and they can be moved under cover between seasons.
  • Measuring the zone. Mark the circle the bowl will occupy, then keep a clear margin between the rim and anything that can burn — chairs, planting, timber walls, overhangs. Tell us the surface and the layout and we will confirm the clearance to work to.
  • Wind and smoke. Set the pit so the prevailing breeze carries smoke away from the seats rather than across them; a compact bowl can be shifted a meter or two when the wind changes.
  • Access for servicing. Leave enough room to reach the bowl with a brush and an ash container, and to lift the unit if it needs moving — a pit wedged between fixed planters is awkward to empty.

つながりましょう

お気軽にご連絡ください。メールをお送りいただくか、直接お越しいただいてご挨拶いただければ幸いです!

名前

お問い合わせ 現在では、折りたたみ式グリル、省スペース設置、OEMサポートを備えた壁掛け式屋外用ファイヤーピットをカスタマイズして、現代的な屋外環境に対応しています。.

 

仕様

製品サイズ カスタム
Reference size 60 × 63 × 60 cm
Shape Round bowl, open top
材料 金属・鉄
色 標準色はブラック。カスタムカラーもご用意しています。
燃料 Wood logs
代表的な用途 Outdoor patio, backyard, garden and terrace
カスタマイズ Size, colour, logo and packaging
Order type Made to order as a custom round iron fire pit
Packing Export packing; combined shipments on request
原産地 中国・福建省

 

Use & Care

  1. Burn dry, seasoned hardwood. Split the logs to a size that sits inside the bowl; dry fuel lights faster and throws less smoke, and a wood burning fire pit is far easier to live with when you are not fighting damp wood.
  2. Keep the fire inside the bowl. Do not heap logs above the rim — a low, steady fire is easier to sit around and keeps embers where they belong.
  3. Let it cool completely. Ash can hold heat for hours, so wait until the bowl is cold to the touch before you touch or empty it.
  4. Empty the ash. Tip cooled ash into a metal container, then brush the bowl out with a soft brush. Never tip ash out while it may still be warm.
  5. Wash and dry. Warm water with a little mild soap, a soft cloth or brush, then dry the bowl thoroughly. Skip abrasive pads, acids, bleach and pressure washers — they strip the finish and leave bare iron behind.
  6. Store it dry. Through the off-season, cover the bowl or move the unit under shelter; standing water inside the bowl is what causes trouble.
  7. Check it each spring. Go over the welds, legs and rim before the first fire of the season, and deal with any surface rust while it is still a small patch.

 

カスタマイズプロセス

  1. Send a reference. A photo of the shape you want, a dimensioned sketch, or a sample you already own is enough for us to quote; the brief can be as rough as a picture with the diameter written on it.
  2. Agree the size and depth. Bowl diameter, depth and leg height are set at this stage, because those three figures decide how the fire sits and how the pit fits your space.
  3. Choose the finish. Black is standard. Other colors are matched to a sample, a painted chip or a reference photo, and the tone is confirmed in writing before production.
  4. Place the logo or marking. For a private-label range, the logo position and method are agreed on the drawing so the marking lands where you want it on the bowl or the base.
  5. Approve the sample. A custom round iron fire pit is signed off before the run starts — photographs for a straightforward color or size change, a physical unit where the form or finish is new.
  6. Production and pre-shipment check. The order goes into production against the approved details, is checked before packing, and photographs of the finished batch can be arranged before the cartons are closed.

 

ご注文・配送

Minimum Order Quantity 100セット
Sample Lead Time 7-15 days (depending on the number of samples)
Delivery Lead Time 30~45日(注文数によって異なります)
Payment Terms 信用状、電信送金
Port of Loading 中国・福建省・アモイ
Place of Origin 中国・福建省
OEM / Customization Referred to pictures or samples
Supply Basis Round iron fire pit supplier for wholesale and custom orders

 

サプライチェーンおよび配送の確実性

We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.

 

よくある質問

How much seating will this compact round iron fire pit suit?

It is sized for a small seating group rather than a crowd — the kind of circle you get with two chairs, a bench and a low table on a patio or courtyard. What matters is the space you have rather than a headcount: mark the circle the bowl will occupy, add the margin you want around the rim, and send us the layout. We will confirm a bowl diameter that leaves your walkway and doorways clear.

What firewood should I burn in it?

Dry, seasoned hardwood, split so the pieces sit comfortably inside the bowl. Hardwood gives a longer, steadier bed of coals than softwood, and dry fuel keeps the smoke down — which is usually what people mean when they ask for a wood burning fire pit that behaves well on a patio. Avoid painted or treated timber, and never use charcoal lighter fluid in an open bowl.

Can you match a size I already have?

Yes. If you are replacing an existing bowl, or fitting into a stone ring, a built-in surround or a fixed terrace layout, send the diameter, depth and height you need — a dimensioned sketch, or a photo with the measurements marked on it, is enough. Every custom round iron fire pit is made to those figures rather than trimmed from a stock size, so tell us which dimension is fixed and which one can move.

Will the black finish change once it has been used?

Expect some change. Where the flame touches the bowl the black will darken and take on a heat patina, and the outside will dull slightly with sun and weather. That is normal behavior for a black finish on hot iron, not a fault. If you need a specific tone held across a product range, ask us to match it against a physical sample and judge it in daylight before the order is confirmed.

Can I get replacement parts later?

Yes — legs, rims and bowls can be quoted from the drawings used for your original order, so a replacement matches the unit you already have. As a round iron fire pit supplier we hold a specification per order rather than one stock size, which is why it helps to quote the bowl diameter and your order reference when you ask.

Can it stand on a timber deck?

It can, with the same care you would take with any open fire on a combustible surface. Stand the bowl on a heat-resistant pad or a stone slab rather than directly on the boards, keep it clear of railings, timber walls and anything above it, and check the fire regulations for your area before the first burn. Tell us the surface you plan to use and we will confirm the clearance to work to.

晴れた日のまともな船

クロック

黒、カスタムカラー対応

サイズ

60×63×60cm