メーカー製 装飾用鉄製ファイヤーピット 「星空の山と森」の切り抜きデザイン 裏庭用 頑丈なパネル接続式
- 製品サイズ: カスタム
- 色:黒、カスタムカラー対応
- 最小注文数量:100セット
- 材料:金属-鉄
- サンプル納期:7~15日(サンプル数による)
- 納期:30~45日(注文数によって異なります)
- OEM/カスタマイズ:写真やサンプルを参考にすることができます
- 原産地:中国福建省
- 輸出入:中国福建省厦門港
- 支払い:L/C、T/T
製品概要
A landscape instead of a bowl. Most wood-burning fire pits are a bowl with a vent pattern pressed into the side. This custom decorative iron fire pit is built from iron panels cut with a mountain ridge, a treeline and a night sky, then joined into a freestanding ring so the fire sits behind a silhouette rather than behind a rim.
That makes it a different piece on a shelf: a decorative centrepiece rather than a utility heater, and an obvious main image for a garden centre display, a marketplace listing or a hotel courtyard where a plain black bowl would disappear into the furniture. It suits importers building a shape-led outdoor heating range, private-label brands who want a distinctive hero model, and project buyers specifying a repeated unit for a terrace.
It lives outdoors on a patio, a terrace or level ground, and an evening with it is uncomplicated: build a small fire in the middle, let it catch, and the cutouts start to work as the flames rise. The design carries right around the ring, so guests can sit on any side instead of crowding one face.
Because the pit is assembled from panels, size, panel count and scene are all set by the order rather than fixed by a catalogue number. Tell us the scene, the size and the quantity you have in mind, and we will come back with the panel layout and the next step.
Starry Mountain Forest Cutout Design
- The scene. A mountain ridgeline, a band of firs and a scatter of stars, with a moon above them, are cut through the panel faces. Every element is an opening in the iron rather than a printed graphic, so there is nothing to peel, fade or clean around.
- How it is cut. Laser cutting keeps the mountain shoulders sharp and the tree points clean. Because the laser-cut panelscome off one artwork file, panel five matches panel one.
- What the fire does to it. With flames up, the openings read as light against dark iron. From a few metres back you see the ridgeline and the treeline; closer in, the star gaps throw small points of light across the paving.
- Drawn to run around the ring. The scene is laid out so the ridge and treeline carry across the panel seams instead of stopping at them, which is why the pit has no obvious front and no awkward side to turn away from the room.
- Your scene, not only ours. The mountain and forest is one artwork; it can be redrawn as a city skyline, a regional landmark or a house pattern. That is what makes it a custom starry mountain forest cutout fire pit rather than a single fixed design.
- One scene across a batch. A dozen units for a hotel or a hundred for a chain have to read as one product on the floor. Cutting from a single artwork and a single panel layout, against an approved sample, is how a mixed pallet still looks like a range.
- Edges and handling. Cut edges are dressed before the finish goes on so nothing stands up to catch a hand. If the pit will be moved often, ask to see the edge finish on your approved sample.
Panel Construction & Joint Alignment
The ring is built from separate iron panels joined edge to edge into a closed shape. The joint decides how the pit looks after a season outdoors: panels that meet flush keep the ridgeline continuous and the ring standing square, while a joint that works loose shows as a step in the silhouette and a lean at the base.
We build to a panel layout rather than to whatever the steel does that day. Because we hold the artwork, the joint layout and the colour reference as the decorative fire pit manufacturer on the order, a repeat run is cut to the same panel positions and the same seam width. That is what lets a second container sit next to the first on a shop floor without a visible mismatch.
Panel construction also changes how the product travels. A welded bowl is a bulky shell; a panel set breaks down into flatter, stackable sections, so cartons are shallower and a container carries more units for the same volume. On a mixed order of fire pits and racks, that density is usually worth more than a small difference in unit cost, and the face of the pit is less exposed in transit than the face of a bowl.
Assembly on arrival is straightforward but worth planning. Pass the connection details to whoever builds the display or hands the pit to an end customer, and make sure every panel is fully seated before the ring is used.
Three checks on the first unit off the line will tell you most of what you need: that the ridgeline meets at every seam, that the ring stands flat on a hard surface without rocking, and that the lower edge is finished to the same standard as the face.
つながりましょう
お気軽にご連絡ください。メールをお送りいただくか、直接お越しいただいてご挨拶いただければ幸いです!
仕様
| 材料 | 金属・鉄 |
| 製品サイズ | Custom; final dimensions confirmed from the approved drawing |
| 色 | 標準色はブラック。カスタムカラーも承ります。 |
| Construction | Laser-cut iron panels joined edge to edge |
| Panel connection | Edge-to-edge joins; hardware and assembly method confirmed on the approved sample |
| Design | Starry mountain forest scene with moon and star cutouts |
| Format | Freestanding wood-burning fire pit |
| 燃料 | Wood only |
| カスタマイズ | Scene artwork, panel layout, size, colour and logo confirmed per order |
| 終了 | Coating colour matched to the approved sample |
| 原産地 | 中国・福建省 |
Placement & Footprint
- Backyard patio. A custom decorative iron fire pit gives a seating group its centre; set it on paving, gravel or decking that is level and heat-safe, and leave room to walk around it.
- Garden seating with a backdrop. The silhouette performs well against a wall, hedge or fence rather than against busy planting, so the cut pattern has something plain behind it after dark.
- Hotel and restaurant terraces. Fix one diameter and one colour for the whole terrace, then keep that specification for replacements so the space reads as designed rather than assembled.
- Holiday lets and campsites. Panels travel flatter than a bowl, which suits seasonal set-up and indoor winter storage where the pit is only out for part of the year.
- Showroom floor and photography. The ring photographs as a clean black silhouette in daylight and as a lit scene at dusk, so one product covers both the catalogue shot and the lifestyle shot.
- Measure the footprint first. Size is set by the order, so chalk the diameter you want on the ground, stand chairs around it, and check the clearances you need before the drawing is fixed. Confirm the final diameter and height with our team on the approved drawing.
- A solid panel wall changes how air moves around the fire compared with an open mesh bowl. On an exposed terrace, set the pit where the prevailing wind will not push smoke straight into the seating before the layout is agreed.
カスタマイズプロセス
- Send the brief. A reference photo of a scene you like, the approximate size you want, the quantity, and the market the pit will be sold in.
- Feasibility and quote. For a custom starry mountain forest cutout fire pit we check panel count, diameter, motif scale, colour, packing and carton, then come back with what is practical and at what cost.
- A physical sample is approved before production and becomes the reference that the bulk run is measured against.
- Artwork and packing. Logo, label, instruction sheet, barcode and carton are settled at this point. Changes after approval are possible, but they move the schedule, so this is the stage to be thorough.
- The laser-cut panels are joined and finished to the approved sample, with the scene, joint fit and colour checked against it as the run progresses.
- Inspection and documents. Inspection before packing, third-party inspection where you want it, and the export paperwork prepared for the shipment.
- Second sizes and second colours. Once the artwork and panel layout exist, adding a smaller diameter or another finish to the programme is quicker than starting again from a reference picture.
ご注文・配送
| 最小注文数量 | 100セット |
| 納期例 | 7~15日(検体の数によって異なります) |
| Delivery lead time | 30-45 days, depending on the number of orders |
| Payment | 信用状、電信送金 |
| 輸出港 | Port of Xiamen, Fujian, China |
| OEMおよびカスタマイズ | Worked from your pictures or a physical sample |
| Sample approval | Bulk production follows the approved sample |
| Order changes | Size, colour, scene and packaging changes confirmed before production |
| パッケージ | Export cartons or crates; carton markings agreed at order stage |
| Shipping terms | Quoted per destination, volume and shipping method |
| Documents | Commercial invoice and packing list; other destination documents confirmed per order |
| Quality check | Pre-shipment check against the approved sample; scope confirmed at order |
Maintenance & Seasonal Care
- Let it go cold. Wood ash stays hot for hours, so empty the pit the next day rather than the same evening, and tip the ash into a metal container rather than a bin.
- Clean without soaking. A soft brush or dry cloth takes soot off, and a damp cloth with a little mild detergent handles marks. Dry the iron straight away, keep water out of the joints, and skip abrasive pads, strong acids, alkaline cleaners and pressure washers.
- Check the joints once a season. Run a hand round the ring and look for a seam that has opened or a panel that has started to rattle, then reseat or tighten it before the next fire.
- Touch up chips early. A chip the size of a fingernail is a five-minute job; left through a wet winter it becomes a rust patch. Ask us for the finish reference on your batch and cover the spot with a heat-resistant metal paint. As the decorative fire pit manufacturer for your order we hold that reference, so the repair blends into the panels around it.
- Cover it dry. Use a breathable cover rather than sealed plastic, and only once the metal is dry. Trapping moisture under a cover does more damage than leaving a well-finished pit out in the open.
- Watch coastal air. Salt and wet winters speed up surface rust. Check the finish more often, dry the pit after heavy rain where you can, and keep the base out of standing water.
- Start-of-season routine. Before the first fire of the year, re-check the seams, touch in any new chips, and give the whole ring a dry day in the open.
Panel Assembly & Arrival
- How it travels. The panels ship nested flat, with the connectors bagged and taped inside the carton, so the carton stays shallow and a pallet carries more units than the same volume of welded bowls. Ask for the units per carton and the packed dimensions for your run when you plan container loading, and keep the fixing bag with its panels rather than in a separate crate.
- Mark the panels before you unpack. Lay them out in the order they join, with the ridgeline and treeline running one way. If the run is not numbered at packing, tape a number to each panel as you take it out; an unmarked set is the usual reason a second assembly goes wrong.
- Build on the ground it will stand on. Assemble on level paving, decking or gravel, not on grass and not on a slope. A wood-burning fire pit closed on uneven ground takes a set and will rock as soon as it is moved.
- Fit every joint loose, then tighten. Bring all the joints together with the fixings only finger-tight, then work round the ring closing them in turn. Fully tightening one seam before the next is engaged pulls the ring out of shape and makes the last joint stubborn.
- Use two people above a small diameter. One holds the panels upright and square while the other closes the joints. A panel dropped on a hard floor dents at the edge, and that dent shows against the light once the fire is lit.
- Check three things before the first fire. Run a hand round every seam for a step, sight along the rim for a true circle, and press the top edge to confirm the ring does not rock. A joint that stands proud is loosened on both sides and reseated, never forced.
- Keep the first fire modest. Let any residue from cutting and finishing burn away on a short, small fire, then let the pit cool completely before it is used properly or cleaned.
- Pack it away marked. For winter storage, tape a number to each panel, keep the fixings in their bag and store the set dry. A marked set rebuilds in minutes in spring; send an assembly sheet in the carton language of your market so end customers can do the same.
Service & Panel Replacement
One contact from brief to shipment. Your enquiry, sample approval, production run and any question that comes up afterwards stay with the same sales contact, so nothing has to be explained twice. Keep the order reference and the destination market to hand when you write, and the specification, colour reference and packing agreed on your order can be pulled up straight away.
Panels kept on file. The artwork, the panel layout and the approved colour reference stay with your order file. A replacement can therefore be cut from the same file as the original laser-cut panels and finished to the same colour, rather than matched by eye from a photograph. On a terrace of twelve or fifty identical units, that is the difference between a repair and a visible odd one out.
How to ask for a panel. Send a photograph of the damaged panel, say which position it occupies in the ring, and quote the order reference and delivery date. Position matters: the same mountain scene is carried on panels of different shapes and widths, and a panel cut for one position will not close the ring in another.
Spares with the bulk order. Hospitality and landscape buyers often add a small number of spare panels plus a spare set of connectors to the production run, so a damaged unit is put right from stock instead of waiting for a new cut and a second shipment. Set the quantity yourself and ask for the spares to be priced into the quotation.
Finish touch-ups and instructions. A heat-resistant metal paint matched to your reference handles chips at the edges; ask for that reference to travel with the shipping documents so the site team or the end customer can keep a tin to hand. Assembly sheets and care notes can carry your branding and be written in the language of the destination market — check the wording on the sample pack before printing.
Terms confirmed in writing. Replacement scope, timing and who carries the cost for a damaged panel are agreed per order rather than assumed, so ask for them alongside the price and keep them with the order file.
Format Comparison
| Option | Format | When it fits |
| Decorative panel pit (this model) | A custom decorative iron fire pit built from scene-cut panels that join into a ring | The seating group needs a centrepiece, and the lit silhouette is what sells it on a listing or a shop floor |
| Decorative laser-cut ring | A ring carrying one motif — wildlife, deer, stars — around the firebed | The end customer already has a pit surround of their own, or wants the decoration without the height of a bowl |
| Hexagon no-tool panel pit | Six panels that go together by hand, with nothing to tighten | Flat-pack wholesale and seasonal buyers who take the pit apart and rebuild it every year |
| Round or square spark-screen bowl | A plain bowl with a mesh screen or lid seated on the rim | Spark containment and a calm, simple profile matter more than the scene |
| Square insert ring | A component sized to an existing masonry, brick or steel opening | The customer is building the fire pit opening and buying the burner as one part of it |
| Two sizes of this scene | One artwork, one panel layout, two diameters | A range that covers a courtyard and a hotel terrace from a single sample approval |
サプライチェーンおよび配送の確実性
Decent Crafts has been sourcing and exporting from Quanzhou, Fujian since 2008, and goods leave through the port of Xiamen. We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.
よくある質問
Q1. Does the fire pit arrive assembled?
It travels as a panel set joined with a connection system, which is how the cartons stay shallow. Ask us for the connection sequence and the fixings supplied with your order, then seat every panel fully before the first fire, because a joint that is only half closed will work loose once the iron starts heating and cooling.
Q2. Can we cook on it, or is it for heating only?
This model is a heating fire pit and does not include a grill grate. If cooking over wood is part of the plan, look at the multi-functional fire pit in the range, which pairs the firebed with a BBQ grill and a firewood store, and keep the two models separate in your range rather than asking one to do both jobs.
Q3. Can you cut a scene other than mountains and forest?
Yes. The custom starry mountain forest cutout fire pit is one artwork among many; we have cut landscapes, wildlife patterns and house artwork. Send a sketch or a reference and we will show you how it breaks across the panels and how much fine detail survives at the size you need.
Q4. What happens if a single panel is damaged later?
Send a photo of the panel and the joint it sits in, and tell us its position in the ring. As the decorative fire pit manufacturer for your order we hold the artwork and the panel layout on file, so a replacement can be cut to the same scene rather than to something close, which matters when one unit in a terrace of twelve has to be put right.
Q5. Can it go under a pergola or on a covered porch?
A custom decorative iron fire pit of this size needs open sky above it. A wood fire produces smoke and carbon monoxide, so keep the pit out of enclosed or roofed spaces, away from overhanging branches, and clear of walls and furniture, and follow the fire rules that apply where it will be used.
Q6. What wood should we burn in it?
Dry, seasoned hardwood split into small logs gives the steadiest fire and the least smoke. Avoid treated, painted or resinous softwood, and never use the pit for household rubbish, because the residue stays on the iron and in the air around the seating.
| クロック | 黒、カスタムカラー対応 |
|---|---|
| サイズ | 36×12インチ |


























