粉体塗装仕上げの鉄製ファイヤーピット。六角形で、よく考えられた通気構造により、よりクリーンな薪焚きを実現

Build & Finish
Heavy iron panels — Each side is formed from thick metal-iron sheet, so the bowl holds its shape through repeated heating and cooling instead of flexing at the joints.
Baked powder coating — The finish is cured at high temperature, giving a hard, even matte black surface that is rust-resistant in outdoor use and stays consistent across all six panels.
Tight panel joints — Edges are cut to line up, so the assembled hexagon reads as one solid form rather than six separate plates.
Colour options — Black is standard and custom colours are accepted, which lets a distributor match a seasonal palette or a house brand.
Compliance — Our products are made to international quality standards and are covered by REACH (SVHC) compliance.

Hexagonal Ventilation
の powder coated iron fire pit uses a precision laser-cut vent pattern rather than a few punched holes. Because each of the six sides is a flat panel, the vent field can be generous without thinning the structure, and air reaches the base of the fuel bed where a fire actually needs it. The result is a livelier burn: wood catches faster, the load burns more completely, and less smoke is pushed out of the top opening. Keep the vents clear of compacted ash when you clean the pit, since a blocked vent line is the usual reason a wood fire starts to smoulder. The pattern runs along the lower half of every panel, so it also feeds air under a fresh log when you add one mid-evening.

Specifications

Applications
Backyard and patio evenings — Built to your footprint, the pit becomes the fixed centre of a seating area, with one size for compact terraces and a larger one for open lawns.
Garden and villa courtyards — The geometric silhouette reads as a deliberate design piece against planting, gravel or stone paving, which suits courtyard and landscaping schemes.
Cabin and holiday homes — A pit that stores flat suits properties that are closed for part of the year, and it can be moved between a deck, a fire area and a shed without a van.
Wholesale showroom display — One assembled hexagon shows the shape and finish on the floor while the rest of the stock stays stacked flat in the warehouse.
Evening gatherings — The open top takes standard split logs, so there is room to build up a bed of fuel before guests arrive.

よくある質問

Q1. What size is the fire pit, and can it be made to our own dimensions?
Size is built to order rather than fixed, so the footprint, height and wall thickness follow the drawing or sample you approve. As an iron fire pit manufacturer we regularly work from customer drawings and physical reference pieces, which means a pit can be matched to a specific patio layout or container plan. Confirm the final dimensions in writing before production begins.

Q2. What fuel should we burn, and where should the pit be placed?
The powder coated iron fire pit is designed for wood fuel, and dry, seasoned split logs give the most efficient burn: they light quickly, burn hot and leave less smoke than damp wood. Set the unit on a level, non-combustible base such as stone, gravel or a paving slab, well clear of overhanging branches, dry grass and combustible decking. Let the ash cool completely before you clear it out.

Q3. How does the hexagonal footprint compare with a round fire pit?
A hexagon of the same overall width has slightly less internal area than a circle, but it gains in placement: one flat side can sit parallel to a bench, a wall or a patio edge instead of leaving a curved gap. That makes the pit easier to line up along a boundary or between two seats, which is usually the reason a buyer takes the hexagonal shape over a round bowl.

Q4. How should the fire pit be cleaned and cared for?
Let the ash cool, tip it out and wipe the panels with a dry cloth rather than a wet wash. Check the joints once a year for debris trapped between the sides, and if the pit stays outside, use a cover to keep standing water and leaf litter out of the bowl. If you take the pit apart for the winter, store the panels flat and indoors.

Q5. Is the fire pit supplied flat-packed, and how does it go together?
Yes, the six sides are cut to line up into the hexagon and are fixed together on site, then separated again for storage or transport. That is what keeps the carton compact and the freight cost sensible. If your team wants the fixing layout up front, ask us and we will send it so you can see how the sides lock together.

Q6. Can you build a custom hexagonal fire pit from our own drawing?
Yes. Custom hexagonal fire pit orders are produced from a picture or a physical sample you supply, covering the panel proportions, opening size and finish. Send your drawing or reference piece and we will confirm what can be reproduced. Custom work runs alongside our standard designs, so both can sit in one order.

つながりましょう

お気軽にご連絡ください。メールをお送りいただくか、直接お越しいただいてご挨拶いただければ幸いです！

このフォームに入力するには、ブラウザーで JavaScript を有効にしてください。

またはメッセージメール

名前 *

名

姓

メール *

コメントまたはメッセージ

提出する