Wide Bowl Corten Steel Fire Pit Pedestal Base Natural Rust Patina For Outdoor Patio
- 製品サイズ:カスタム
- 色:黒、カスタムカラー対応
- 最小注文数量:100セット
- 材料:金属-鉄
- サンプル納期:7~15日(サンプル数による)
- 納期:30~45日(注文数によって異なります)
- OEM/カスタマイズ:写真やサンプルを参考にすることができます
- 原産地:中国福建省
- 輸出入:中国福建省厦門港
- 支払い:L/C、T/T
製品概要
The wide corten steel fire pit with pedestal base is made for outdoor spaces where the fire is meant to be the centre of attention. The bowl is broad and relatively shallow-sided, so a full load of logs spreads into a wide bed of flame instead of piling into a narrow column, and the pedestal lifts that bowl off the ground. On a terrace, that height changes how the fire is experienced — guests walking out with drinks see the flames from standing height rather than looking down into a bowl near their knees.
We build this model for importers, garden stockists, e-commerce sellers and hospitality projects that want a recognisable focal piece rather than another low bowl. It takes the place of a ground-level fire pit or a fire table on a patio, and it suits spaces where seating is arranged in a loose ring: a courtyard, a roof terrace, a hotel garden, the end of a pool deck. Because the bowl is raised, the unit still reads as a piece of outdoor furniture during the day, when there is no fire in it.
Day to day it is a straightforward wood-burning bowl. Load seasoned logs, light them, and let the open structure feed air to the fuel from below and around the sides. When the fire is out and the unit is cold, tip the ash and brush the bowl. Finish behaviour, sizing and care each have their own section below, because corten rewards a little understanding before the first burn.
– A wide flame bed rather than a tall one — the bowl carries its width across a spread of logs, so the fire burns as a broad band instead of a single peak. That gives a wider pool of heat for a ring of chairs and a fuller flame picture after dark. – Pedestal base that raises the fire — as a pedestal fire pit, the bowl sits clear of the ground on a column base rather than on short legs, which lifts the rim and leaves open space beneath the bowl for air movement. – Weathering steel with a natural patina — the surface is meant to weather. There is no paint film to chip or peel, and the colour deepens with exposure instead of wearing through. – Open structure for ventilation — air reaches the fuel from under the bowl and around the open base, which helps the wood catch and burn evenly instead of smouldering inside a closed shell. – Smoothed edges — the rim and base edges are finished smooth during production, which matters on a piece people walk past, lean on and brush against. – Built for exposed sites — high-strength steel and a level pedestal suit patios, roof gardens and coastal terraces where furniture has to stand up to weather year after year.
Corten Steel & Patina
Corten, or weathering steel, is chosen for outdoor pieces because it does not need a coating to survive outside. Left to the weather, the surface develops a tight oxide layer that settles it against further change, and that layer is the finish you see: a deep, matte brown with orange and umber variation across the bowl. Newly made units can look more orange than brown, and the move to a settled colour happens over the first seasons outdoors — faster in coastal air, salt spray and constant humidity, slower in a dry inland garden. Two things are worth knowing before the first burn. First, every bowl weathers differently, so the unit you receive will not match a photograph exactly, and units inside the same order will vary from one another; that variation is the point of the material rather than a defect. Second, during the first wet seasons weathering steel can leave a light oxide tint on pale paving or decking beneath it, which is why we suggest a stone paver, a gravel strip or a mat under the base on light-coloured surfaces. If your market prefers a uniform colour, black is the standard painted option and other colours are accepted on request. Do not wax, oil or paint over the patina to protect it — the surface is doing its job, and a coating traps moisture underneath.
Service & Quality
Every unit is checked during finishing and again before packing: edges smoothed, welds dressed, the pedestal sitting level, and the bowl compared with the approved sample. If your team needs a third-party inspection before shipment, say so when the order is placed and we will arrange access at the agreed stage. Where a market asks for documentation on a specific model — a material declaration, a test report for the exact build — ask for it by model and market rather than relying on general statements, because the paperwork follows the piece, not the range.
After arrival, the practical questions are usually about finish and small parts. Photograph anything that arrives damaged and send it to your contact with the carton label, and replacement or repair options are quoted against that information. Fixings and other small components can normally be supplied with a later order if you want to hold stock for after-sales.
As your supplier for this wide corten steel fire pit with pedestal base, we keep one point of contact on your order from sample approval to loading, so the person who confirmed the finish is the person who can answer questions about it later. Ask for production photos at agreed checkpoints if your own customers need reassurance before the goods leave.
Size & Footprint
- Match bowl width to the seating ring — a wider bowl throws heat across a larger circle, so set the diameter by how many people you expect to seat and how far back the chairs sit. Seats placed within comfortable arm’s reach of the rim get the most from the fire. – Check rim height against the setting — the pedestal lifts the rim well above ground level, so plan sightlines from seated eye level before you fix the layout. In a low lounge arrangement, check that the rim does not cut across the view between seats. – Leave clearance around the outdoor fire bowl— keep it away from walls, railings, parasols, awnings and overhanging planting, and check the open-flame rules for the site or building before delivery. – Custom proportions are possible — bowl diameter, pedestal height and rim details can be set from a drawing, a photo or a sample you supply. – Measure for freight as well as for the patio — overall height including the pedestal drives carton size and how many units fit a container, so send us finished dimensions when you ask for a quotation.
Applications
A pedestal fire pit earns its place wherever the fire has to be visible from a distance rather than discovered at floor level. On a roof terrace it puts the flame above the seating and into view from the doorway, so the space reads as finished even before anything is lit. On a hotel or restaurant terrace it gives guests a landmark to gather around and gives staff a piece they can see from the service door and keep clear through the evening. In a walled courtyard garden it lifts the light above the chairs and throws it further across the walls.
Coastal gardens are another natural home. Salt air and humidity push the patina along faster, and the bowl settles into a darker, more even brown within a season or two — the same conditions that turn painted garden furniture into a maintenance problem. For landscaped residential projects and show gardens, the raised form photographs well and holds its shape across a viewing season.
Hospitality buyers often place several units along one terrace and light them together, which is why the pedestal height is worth fixing early: a row of bowls at matching rim height looks deliberate, while mixed heights look improvised. Food service sites should leave a clear working gap between the fire and any serving route, and any site with children needs the bowl set where an adult can watch it easily.
This is an outdoor piece, made for burning wood in the open. It is not intended for enclosed rooms or covered structures.
Bowl Form Comparison
- This wide pedestal bowl — the pick when the fire should read from standing height, when the terrace is seen from inside the house, and when the unit has to look considered even when it is cold.
- Low-profile bowls — sit close to the ground and keep flames below the eyeline, which suits deep lounge seating and conversation pits where the fire is felt more than watched.
- Deep bowls on legs or a crossed stand — carry more fuel in a smaller footprint and suit gardens where the fire is the only heat source on a cold evening.
- Square open-frame pits — line up neatly with straight terrace edges, walls and built-in seating, and are easier to tuck into a corner.
- Portable and folding pits — pack down for camping, seasonal storage or buyers who need a shippable, stackable unit rather than a fixed feature.
- Sphere and basket forms — sculptural pieces for design-led ranges and gift-season merchandising, where the shape carries the sale.
つながりましょう
お気軽にご連絡ください。メールをお送りいただくか、直接お越しいただいてご挨拶いただければ幸いです!
お問い合わせ 現在では、折りたたみ式グリル、省スペース設置、OEMサポートを備えた壁掛け式屋外用ファイヤーピットをカスタマイズして、現代的な屋外環境に対応しています。.
仕様
| 製品サイズ | カスタム |
| Reference build | 60 × 63 × 60 cm |
| 色 | Black; custom colours accepted |
| 材料 | 金属-鉄 |
| Bowl steel | Corten weathering steel with natural rust patina |
| Bowl shape | Wide round bowl |
| Base | Pedestal base, open structure |
| Edge finish | Smooth finished edges |
| 燃料 | Wood |
| Use | Outdoor patio, terrace and garden |
| Finish behaviour | Develops a natural patina with outdoor exposure |
カスタマイズプロセス
- Send what you want matched for your custom corten steel fire pit — a photo, a sketch with the bowl diameter and pedestal height, or a physical sample of an existing piece.
- We go through the details with you: bowl proportions, rim and base treatment, colour or patina, logo placement if you need one, and how the unit should be packed.
- A sample is produced for your approval, so you can check proportions and finish in your own daylight before any bulk order is placed.
- Once the sample is signed off, the approved piece becomes the reference for production and every unit is checked against it during finishing.
- Confirm quantity, packing and delivery with your sales contact before production is scheduled, so nothing about the build changes after the material is cut.
お手入れ・メンテナンス
Let the fire burn out and the unit cool completely before you touch it; ash holds heat far longer than the bowl looks like it should. Tip the ash out once it is cold and brush the bowl with a soft brush. Damp ash left sitting in an outdoor fire bowl is the single thing most likely to shorten its life, so empty it after each burn rather than leaving a layer through the week, and never leave ash in the bowl over winter.
For marks that do not brush away, wash with water and a mild neutral detergent, then dry the surface properly with a cloth. Keep acids, alkalis, steel wool, abrasive pads and pressure washers away from the steel — they cut through the patina and leave bright patches that take months to blend back in. Do not try to scrub the bowl back to a uniform colour; the patina is the finish.
Check the pedestal and the fixings at the start of each season, and more often on a coast where salt is in the air. If the unit stands outside all year, cover it or move it under shelter for the wettest months, and make sure the cover is dry inside before it goes on. A little attention in autumn is what keeps the piece ready for the first warm evening of the next season.
ご注文・配送
- Order quantity — this model is supplied from 100 sets. If your first order is smaller, raise it with your sales contact early, since smaller runs are discussed case by case. – Payment — L/C, T/T. – Sample lead time — 7–15 days, depending on the number of samples in the request. – Delivery lead time — 30–45 days, depending on the number of orders in the schedule. – OEM and customization — referred to according to pictures or sample, so send your reference early enough for it to be costed into the quotation. – Planning a mixed order with your corten fire pit supplier — tell us at quotation stage if the container will carry more than one style, so packing and loading are planned together and the final terms are confirmed on the proforma invoice.
サプライチェーンおよび配送の確実性
Decent Crafts has been sourcing and exporting from Quanzhou, Fujian since 2008, and goods leave through the port of Xiamen. We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.
よくある質問
Can this wide corten steel fire pit with pedestal base stand on a wooden deck?
Yes, with the usual precautions. The pedestal keeps the burning bowl up off the boards, so heat is not applied directly to the deck surface, but the base still gets hot and embers can fall. Set the unit on a non-combustible pad or a section of stone, keep it clear of railings and overhangs, follow the fire rules for the building or site, and never leave it burning unattended.
How stable is a pedestal fire pit on uneven paving?
Set it on flat, solid ground and check it for rock before you light it. On gravel, decking or a gently sloping terrace, bed the base on a paving slab or stone paver so the load is spread and the bowl sits level. If your site is unusually uneven, tell us when you order and the pedestal can be made to suit the drawing you approve.
Where should I put an outdoor fire bowl on a rooftop terrace?
Choose the most sheltered corner, away from the parapet, the lift overrun and anything that funnels wind. The raised bowl shows above a low parapet, which is often why it is chosen for roof gardens, but that also exposes the flame to breezes, so keep it out of the prevailing wind. Check the building’s rules on open flames and solid fuel before the unit is delivered.
Can I order a custom corten steel fire pit in a different bowl diameter?
Yes. The model is built to order, so the bowl diameter, pedestal height and rim details can be set to the drawing you approve. Send a sketch, a photo of an existing piece or a physical sample, and we will confirm what can be matched before the sample is made.
Does the bowl come with a spark screen or a cover?
The specification shown here covers the bowl and the pedestal base. A spark screen, cover or cooking insert is not part of that standard build — ask our team what can be added or packed with your order, and have it written into the quotation so it is included correctly.
| クロック | 黒、カスタムカラー対応 |
|---|---|
| サイズ | 60×63×60cm |


























