Name: 맞춤형 도매용 바비큐 그릴, 회전식 원형 캠프파이어 그릴, 야외 모닥불 요리를 위한 지면 고정형
Availability: InStock

Product Overview
This grill cooks over an open fire without legs, bolts or a folding frame. A single metal stake is driven into the ground and the round mesh grate turns above the fire on a collar, so the cooking surface follows the heat rather than the other way round. As a ground stake campfire grill supplier, we build this format for campgrounds, rental fleets, outdoor catering teams and private-label camp programmes — buyers who need one grill that works on grass, packed soil or a bare campfire circle. It replaces tabletop grills that demand a level surface, and it stores as a stake and a grate head with nothing loose to lose.

Material & Build
The grate, collar and stake are metal-iron, welded into one head so nothing works loose around the pivot. A black protective coating is the standard finish, and it is what keeps the surface presentable after repeated exposure to fire, ash and weather. Because every custom ground stake campfire grill is finished to order, colours beyond black can be matched from your picture or sample. Before packing we check weld quality, how evenly the coating sits, and how freely the collar turns. Our products are produced to international quality standards, with REACH (SVHC) documentation covering product safety. If you are matching an existing range, confirm the exact finish against a panel or sample before the production run.

Specifications

재료	Metal-iron
Finish	Black protective coating
Colours	Black standard; custom colours available
Grill head	Round mesh grate
Mounting	Single ground stake
Grate control	Rotating collar, adjustable over the fire
Reference build	55 × 23 × 45 cm
크기	Custom to your drawing or sample
Format	Stake plus grate head, no legs
Typical use	Open-fire cooking at campsites, events and home fire pits

Setting Up on Site
1.Pick the fire position first. This round ground stake campfire grill needs firm ground, so clear a patch of bare soil or short turf beside the fire rather than loose sand or deep gravel.
2.Drive the stake in vertically with a mallet or the heel of a boot, leaving enough of it above ground for the collar to clear the fire bed.
3.Seat the grate head on the stake and turn it through a full arc before lighting anything. If it binds, lift it off and clear soil from the collar.
4.Light the fire, then swing the cooking surface over the flames and rotate it until the grate sits where you want it above the coals.
5.Once the metal has cooled, lift the head off, brush ash from the mesh and wipe the collar before the unit goes back in the vehicle.
Scale & Supply Capability
Decent Crafts manufactures metal-iron products in Fujian, China and exports to importers, wholesalers and private-label brands. Our range covers four connected lines: fire pits and fireplace accessories, firewood racks and log holders, pet and livestock feeders, and lawn and garden tools. Buyers can combine several categories in a single order and deal with one factory. OEM and customisation are welcome by picture or sample, with custom colours available. Standard orders start at 100 sets, samples are ready in 7-15 days, and bulk delivery runs 30-45 days. Goods ship from Xiamen port, and we accept L/C and T/T.
자주 묻는 질문
Q1. What kind of ground does the stake need?
Firm soil, packed gravel or short turf holds it most reliably; very loose sand and deep leaf litter will not grip. Because the stake goes into the ground, this format suits a campfire circle or an in-ground fire pit rather than a raised metal bowl. Tell us what your sites look like and we will confirm the stake length that suits them.
Q2. Will the grate work over coals as well as a wood fire?
Yes. It is built for open-fire cooking, so it sits over whatever heat you build. A wood fire is the usual choice at a campfire circle, and a bed of glowing coals gives the same steady cooking heat under the round head. Keep the fuel bed roughly beneath the grate so the heat is not wasted at the edges.
Q3. Can we order our own size, colour and stake length?
Yes. A custom ground stake campfire grill can be built from your drawing, a photo or a physical sample, and the colour is matched to the reference you send. Black is the standard finish. Send the grate diameter, the stake length and the colour you need, and our team will confirm what can be matched for your order.
Q4. How should the coating and the pivot be looked after?
Brush ash off the mesh once the metal has cooled, wipe the collar dry, and keep the head out of long spells of rain or snow. If the rotation starts to stiffen, soil or fine ash has worked into the collar — take the head off, clean the joint, and the movement comes back.
Q5. How is this different from a tripod or folding camp grill?
A tripod hangs the grate from a frame and needs three points planted; a folding grill sits on its own legs and wants level ground. This model trades the legs for one ground stake, so it holds steady on rough, sloping camp ground and leaves a smaller footprint around the fire.
Q6. Can it be used for warming as well as grilling?
Yes. The round head is a cooking surface rather than a fixed plate, so skewers, fillets and vegetables cook directly on the mesh, and rotating the head away from the hottest coals gives you a cooler zone for keeping food warm while the rest finishes.

Setting Up on Site
1.Pick the fire position first. This round ground stake campfire grill needs firm ground, so clear a patch of bare soil or short turf beside the fire rather than loose sand or deep gravel.
2.Drive the stake in vertically with a mallet or the heel of a boot, leaving enough of it above ground for the collar to clear the fire bed.
3.Seat the grate head on the stake and turn it through a full arc before lighting anything. If it binds, lift it off and clear soil from the collar.
4.Light the fire, then swing the cooking surface over the flames and rotate it until the grate sits where you want it above the coals.
5.Once the metal has cooled, lift the head off, brush ash from the mesh and wipe the collar before the unit goes back in the vehicle.

Scale & Supply Capability
Decent Crafts manufactures metal-iron products in Fujian, China and exports to importers, wholesalers and private-label brands. Our range covers four connected lines: fire pits and fireplace accessories, firewood racks and log holders, pet and livestock feeders, and lawn and garden tools. Buyers can combine several categories in a single order and deal with one factory. OEM and customisation are welcome by picture or sample, with custom colours available. Standard orders start at 100 sets, samples are ready in 7-15 days, and bulk delivery runs 30-45 days. Goods ship from Xiamen port, and we accept L/C and T/T.

자주 묻는 질문

Q1. What kind of ground does the stake need?
Firm soil, packed gravel or short turf holds it most reliably; very loose sand and deep leaf litter will not grip. Because the stake goes into the ground, this format suits a campfire circle or an in-ground fire pit rather than a raised metal bowl. Tell us what your sites look like and we will confirm the stake length that suits them.

Q2. Will the grate work over coals as well as a wood fire?
Yes. It is built for open-fire cooking, so it sits over whatever heat you build. A wood fire is the usual choice at a campfire circle, and a bed of glowing coals gives the same steady cooking heat under the round head. Keep the fuel bed roughly beneath the grate so the heat is not wasted at the edges.

Q3. Can we order our own size, colour and stake length?
Yes. A custom ground stake campfire grill can be built from your drawing, a photo or a physical sample, and the colour is matched to the reference you send. Black is the standard finish. Send the grate diameter, the stake length and the colour you need, and our team will confirm what can be matched for your order.

Q4. How should the coating and the pivot be looked after?
Brush ash off the mesh once the metal has cooled, wipe the collar dry, and keep the head out of long spells of rain or snow. If the rotation starts to stiffen, soil or fine ash has worked into the collar — take the head off, clean the joint, and the movement comes back.

Q5. How is this different from a tripod or folding camp grill?
A tripod hangs the grate from a frame and needs three points planted; a folding grill sits on its own legs and wants level ground. This model trades the legs for one ground stake, so it holds steady on rough, sloping camp ground and leaves a smaller footprint around the fire.

Q6. Can it be used for warming as well as grilling?
Yes. The round head is a cooking surface rather than a fixed plate, so skewers, fillets and vegetables cook directly on the mesh, and rotating the head away from the hottest coals gives you a cooler zone for keeping food warm while the rest finishes.