Custom Metal Firepit Custom Sleek Round Bowl Design For Garden And Outdoor

  • Product size:custom
  • Color:black,Accepts custom colors
  • MOQ:100Set
  • Material:Metal-Iron
  • Sample Lead Time:7-15 days (depending on the number of sample)
  • Delivery Lead Time:30-45 days (depending on the number of orders)
  • OEM/Customization:It can be referred to according to pictures or sample
  • PLace of Origin:Fujian,China
  • Import and export :Port of Xiamen, Fujian,China
  • Payment:L/C,T/T

Product Overview

The sleek round metal fire pit is built around one simple idea: a fire should look as considered as the furniture around it. The bowl is shallow and wide with a clean, slim rim, so the flames sit low and spread across the full circle instead of disappearing into a deep drum. From a garden chair it reads as a low table with a fire inside it; from the house it is a dark, calm circle at the end of the lawn.

Each custom round metal fire pit is built to order. You set the diameter, the height and the colour; as a metal fire pit manufacturer we turn those choices into a dimensioned drawing that you approve before production begins, so the bowl that arrives matches the space it was specified for.

Because it is a wood burning fire pit, there is no gas line, bottle or power supply to plan around. You put it where the seating already is, or where you want people to gather. The open bowl is easy to light, easy to feed and easy to watch, and the welded base sits straight on the ground, so there is nothing to install and nothing to connect.

Garden centres, importers and hospitality buyers choose this form when a range needs a design-led centrepiece rather than another utility brazier. It photographs well, it sits comfortably beside benches, low tables and planters, and it gives a buyer who is furnishing an outdoor room something that looks deliberate rather than borrowed from a campsite.

 

Material & Build

For any metal fire pit manufacturer, the base is where the build starts: a welded cross rather than a set of bolt-on legs, so the unit arrives as one solid piece with nothing to tighten and nothing to lose between seasons. The rim is ground and deburred after welding until the edge is smooth to the hand. That matters more than it sounds: the rim is where a hand rests while lighting, where logs are dropped in and where a cover is pulled across, and a sharp weld line will be found in the first week of use. Paint batches vary, and a shade that looks right on a monitor can read quite differently across the full bowl, so send the swatch with your enquiry and we will match to it.

 

Bowl Profile & Siting

  • Slim silhouette. The rim is kept visually light and the bowl shallow, so the fire sits low in the garden and does not cut across the view from the house or along a terrace.
  • Open bowl, outward heat. With no inner liner and no chimney, warmth radiates sideways to the people around the round bowl fire pit — better for a conversation circle than a tall, narrow pit that sends heat straight up past the knees.
  • Diameter against the seating plan. Work the bowl diameter back from the number of chairs and the gaps between them: a wider bowl serves a wider arc but needs more clearance around it. Send us the seating layout and we will size it with you rather than guessing.
  • Height against chair level. Decide the rim height against the seat and armrest of your chairs. A lower rim keeps sightlines open across the fire; a slightly taller one shields the flames from wind on an exposed terrace. Both are made to your drawing.
  • Where it sits. Choose level, non-combustible ground away from fences, overhangs, low branches and doorways. On timber decking, place a non-combustible pad beneath the base as well as relying on the foot pads underneath.

 

Garden & Outdoor Applications

  • Garden seating circle. The classic setting: four to six chairs drawn around the bowl on lawn, gravel or paving, with the fire low enough that nobody has to lean back from it. It replaces a brazier or a chiminea and gives the seating a fixed centre. – Patio and terrace edge. Where a square or deep pit would crowd the table and the walkway, the slim bowl keeps circulation clear. – Courtyards and roof terraces. A low bowl keeps the view open across the space, where a tall chimney pit would dominate a courtyard meant to stay calm. Check the surface loading and the wind exposure of the site before you fix the height. – Hotel, guesthouse and restaurant terraces. Repeatable dimensions and a consistent finish matter more than novelty here — order the batch to one drawing so a replacement ordered next season still lines up with the first. – Show gardens and landscaped projects. When the fire feature is drawn into a layout, we build the bowl to the diameter the plan shows instead of the nearest stock size. – Trade and contract listings. A sleek round metal fire pit photographs well because the open bowl shows flame and depth rather than a dark drum, and the slim profile sits easily in a styled lifestyle shot.

Let’s get connected

Drop us a line, email us or better yet, come on in and say hi!

Name

Contact us today to customize wall-mounted outdoor fire pits with foldable grates, space-saving installation, and OEM support for modern outdoor settings.

Specifications

Material Iron
Bowl thickness 2.5 mm
Product size Custom — the photographed unit measures 60 × 63 × 60 cm
Colour Black as standard; custom colours accepted
Base Welded cross base
Footing Non-slip foot pads
Load bearing Up to 100 kg
Heat resistance Up to 600 °C
Rim finish Smooth, deburred edge
Fuel Wood
Setting Outdoor use only

 

Customization Process

  1. Send the reference. Share photographs, a sketch or a physical sample together with the diameter, height and colour you have in mind. A drawing with the seating layout marked up is the fastest brief we can receive.
  2. Approve the drawing. We return a dimensioned drawing of the custom round metal fire pit for your sign-off — bowl diameter, rim height, base footprint and colour. Changes are simplest at this stage, before any material is cut.
  3. Sign off the finish. Colour and surface are agreed against a physical swatch or a reference sample, never a screen image alone.
  4. Agree a sample if you need one. Ask your sales contact about sample availability and timing when a physical unit has to be approved before the run; the sample is built to the same drawing as production.
  5. The bowl is formed, welded, ground and coated, the base is married up to the bowl as one unit, and checks run in process rather than only at the end.
  6. Inspection before packing. Each unit is checked for rim finish, coating coverage, base alignment and stability, and photographed. A third-party inspection can be arranged if your own process calls for one.
  7. Documents and packing. Carton marks, packing list and photographs of the packed goods travel with the shipment, and model-specific documents can be supplied on request.

 

Spark Guards & Cooking Accessories

  • Spark containment is a separate part on an open bowl, not something built into the rim. If the sleek round metal fire pit will stand on a timber deck, a windy terrace or a family garden, ask us to quote a mesh spark screen or a dome-style wire guard matched to your bowl diameter. Confirm the mesh opening, the handle length and how the guard locates on the rim before you commit to a public claim.
  • A cooking grate turns the bowl into a grill, but it has to sit safely. The grate should rest on the rim or a fixed inner ledge rather than drop into the fire, so the grate drawing follows your bowl diameter and rim width. Tell us whether you plan to cook with pans, skewers or direct over embers, and we will quote the grate style that suits that use.
  • Price the bowl as a standalone unit unless your quotation says otherwise. The bowl, welded cross base and non-slip foot pads are the core item; a spark screen, cooking grate, cover, poker and ash scoop are separate line items. Check the quotation line by line so nothing is assumed to be in the carton.
  • A cover is useful between burns, but it must not seal in moisture. Choose a cover that hangs clear of the rim and lets air move around the bowl, and never fit it over a warm fire or damp ash. If the pit stays outside through winter, a breathable cover plus a dry, raised position works better than a tight plastic sheet.
  • A poker and ash scoop should be long enough that you are not reaching over the flames. Match the poker length to the bowl depth and the scoop to the ash volume you expect; these are small additions that make the wood burning fire pit easier to run day to day.
  • Decide early whether you are selling the bowl alone or as a set. For hospitality and contract orders, keep the same accessory specification across repeat runs so a replacement screen or grate ordered later still fits the bowl you supplied first. Mixed accessory packs can be quoted per model, but the contents need to be fixed before packing.
  • Accessories affect packing and listing data. A screen or grate packed in the same carton changes the carton size and the protection needed around the rim; packed separately, it needs its own label and document line. Tell us which arrangement you want before the order is confirmed so the packing list and product data match what arrives.

 

Use & Care

Treat the bowl like any piece of outdoor metalwork: keep it dry when it is not in use and it will hold its appearance far longer than one left full of wet ash. A wood burning fire pit should never be emptied while it is still warm. Let the fire die down, leave the ash overnight and clear it the next morning with a brush and scoop. Damp ash sitting in the bowl holds moisture against the metal from the inside, which is where most early rust on a fire pit starts.

For routine cleaning, use a soft brush or cloth with water and a mild neutral detergent. Keep acids, alkalis, steel wool and pressure washers away from the coated surface — they cut through the finish and leave bare metal that will bloom with rust within days. Rinse, then dry the bowl thoroughly, including underneath the base.

Check the coating at the start of each season and touch up any chip or scratch while it is small. If the pit lives near the sea or in persistent humidity, check it more often, because salt air accelerates everything. Out of season, cover the bowl or move it into a dry shed; never store it with ash inside, and never leave a cover trapping moisture against a damp surface.

A newly coated bowl can give off a light smell during its first burns as the finish settles. Burn it outside, let it run for a while and the smell disappears. After that, burn dry seasoned wood, keep the fuel below the rim and never use petrol, lighter fluid or ethanol to speed up lighting.

 

Service & Support

  • One contact from drawing to shipment. The person who quotes your bowl follows it through drawing approval, sample sign-off, production checks and documents, so the job is never re-explained to a new desk halfway through.
  • Repeat orders built from the same record. Reorder the same custom round metal fire pit and we work from the approved drawing, colour swatch and packing specification rather than starting again from a photograph.
  • Dimensioned drawings and swatches. Drawings for your files and physical swatches for colour approval — usually what a trade or project buyer needs before a range is signed off.
  • Photographs before packing. Each order is photographed unit by unit before it is wrapped, so you can check rim finish and colour against the approved sample before the container is sealed.
  • Documents for your market. Where a certificate or test report applies to this model, we will name the document and supply it on request rather than claiming blanket certification across the range.
  • Replacement parts and after-sales response. Foot pads and fittings can be supplied with a later order; if something arrives damaged, send photographs of the carton and the unit and we will review it against the packing record.

 

Ordering & Delivery

Minimum order quantity 100 sets
Payment terms L/C, T/T
Sample lead time 7–15 days, depending on the number of samples
Delivery lead time 30–45 days, depending on the number of orders
OEM and customization Made according to pictures or a physical sample
Place of origin Fujian, China
Port of export Xiamen, Fujian, China
Order confirmation Dimensions, colour and finish signed off before production
Packing Confirmed with your sales contact before the order is placed

 

Supply Chain & Delivery Assurance

We work with a network of metal-working suppliers across the region, so a mixed order — several categories, colours or sizes — can be consolidated into one shipment with a single set of export documents. Sampling normally runs 7–15 days and bulk production 30–45 days, booked ahead of peak season; we inspect before packing and can bring in a third-party inspector. Payment is by T/T or L/C, with final terms and Incoterms confirmed on the proforma invoice.

 

FAQ

Can the bowl be made to a different diameter and height?

Yes — product size is custom, and the bowl is built to a dimensioned drawing you approve before production. Send the diameter, rim height and the footprint you need, or a rough sketch of the space, and we will return a drawing for sign-off. If you already hold a sample or a photograph of a custom round metal fire pit you want matched, we can work from that instead.

How does a shallow bowl compare with a deep fire bowl?

A round bowl fire pit like this one spreads the fire wide and low: the flame stays visible from every chair and heat reaches the circle of people sitting around it. A deep bowl holds more wood and throws stronger radiant heat at close range, which suits cold, exposed sites. If you want conversation-height flames and an open view, the shallow bowl is the better choice; if heat output matters more than sightlines, specify a deeper model from the range.

What keeps the bowl stable on decking or uneven ground?

The base is a welded cross rather than bolt-on legs, and non-slip foot pads sit underneath, so the unit arrives as one solid piece with nothing to tighten. The finished bowl carries up to 100 kg. On timber decking, still place a non-combustible pad beneath the base and keep the pit clear of railings, overhangs and anything that can blow across the rim.

Which colours can I order, and how close will the production shade be?

Black is the standard finish and custom colours are accepted. Colour is approved on a physical swatch or a sample of the shade you want to match, not on a screen image, because paint batches vary and a large coated surface reads differently from a small chip. Allow for slight batch-to-batch variation across repeat orders. As a metal fire pit manufacturer we would rather settle the shade on a swatch than have a container arrive a tone out.

What wood should I burn, and how full should the bowl be?

Burn dry, seasoned wood: hardwood logs split small light faster and burn more cleanly than green or resinous wood. Load the fuel below the rim so embers cannot roll out over the edge, and add logs gradually rather than filling a cold bowl in one go. Never use petrol, lighter fluid or ethanol to start a wood burning fire pit — paper and kindling are enough.

Does the slim profile mean a smaller fire?

No. The bowl is shallow rather than small, and the diameter is made to your order, so a wide bowl can hold a full fire while staying low in the garden. What you give up in fuel depth you gain in flame visibility and heat spread across the seating circle. If a long burn from a single load matters more, ask us to quote a deeper bowl from the same range alongside this sleek round metal fire pit.

decentcrafts of sunny

Clock

black,Accepts custom colors

Size

60*63*60cm